Cutting machine control system (kit)
brief introduction:
The cutting machine control system belongs to custom-made kit, the main three manual tension regulation circuit board and a microcomputer control circuit board to centrally control the cutting machine. The microcomputer control circuit board integrates photoelectric deviation correction controller, length measurement and controller, speed detector, main motor and fan control circuit, so it not only has good reliability and convenient operation, but also can automatically stop the machine when correcting the deviation to the limit, save the measuring length, and automatically run to the length deceleration buffer shutdown after setting the working length.
characteristic:
★ Built-in intelligent single-chip computer control
★ Preset length data control shutdown
★ Correcting the deviation to the limit can automatically stop
★ With power outage data storage function
★ It is more convenient to operate as one of line speed, length and deviation correction.
parameter :
Main motor speed regulation: | The variable-frequency or slip-difference motor speed-regulating device can be selected according to the requirement |
Tension system: | Manual tension control board with 3 constant current |
Deviation correction and detection mode: | Check the edge, follow the line. |
Max. measured length: | 0-99999 M |
Set the length range: | 0-99999 M |
working voltage: | AC220V±15% 50Hz |