• Manufacturer Part Number: HS561 • Motor Type: Hybrid Stepper Servo Motor • Frame Size: 56x56mm Step Servo Motor Nema 23 Mounting • Step Angle: 1.8deg • Torque: 1.1-2.8 N.m • Motor System: Closed-loop control • Shaft Type: Custom Shaft • Application: Camera Motor
Product Details
Although the NEMA 23 stepper motor is an equipment that can be controlled accurately, it is an open-loop service, so an encoder should be installed to realize closed-loop feedback control. The NEMA 23 closed-loop stepper motor is an assembly of stepper motor with encoder.
Commonly, the encoder is installed on the double shaft motor back. In principle, it is possible to install a motor on one end of the lead screw and an encoder on the other. But it may be affected by the accuracy of the stepper motor. The misjudgment of the losing step occurs.
If you have any interest, please contact us.
Electrical Specification
Series Model
Rated Voltage(V)
L (mm)
Phase Current (A)
Phase Resistance (Omh)
Phase Inductance (mH)
Holding Torque (N.cm)
Moment of Inertia (g.cm2)
Motor Weight ( g)
HS561-11030A
2.4
56
3.0
0.8
2.4
110
200
980
HS561-11042A
1.68
56
4.2
0.4
1.2
110
200
980
HS561-22030A
3.6
80
3.0
1.2
4.0
220
480
1400
HS561-22042A
2.94
80
4.2
0.7
2.0
220
480
1400
HS561-25030A
4.2
100
3.0
1.4
5.5
250
800
1550
HS561-28042A
2.94
100
4.2
0.7
2.5
280
800
1550
Matched Driver
• SS5 Stepper Servo Motor Driver.pdf
Find More Stepper Servo Driver
Although the NEMA 23 stepper motor is an equipment that can be controlled accurately, it is an open-loop service, so an encoder should be installed to realize closed-loop feedback control. The NEMA 23 closed-loop stepper motor is an assembly of stepper motor with encoder.
Commonly, the encoder is installed on the double shaft motor back. In principle, it is possible to install a motor on one end of the lead screw and an encoder on the other. But it may be affected by the accuracy of the stepper motor. The misjudgment of the losing step occurs.
If you have any interest, please contact us.
Electrical Specification
Series Model
Rated Voltage(V)
L (mm)
Phase Current (A)
Phase Resistance (Omh)
Phase Inductance (mH)
Holding Torque (N.cm)
Moment of Inertia (g.cm2)
Motor Weight ( g)
HS561-11030A
2.4
56
3.0
0.8
2.4
110
200
980
HS561-11042A
1.68
56
4.2
0.4
1.2
110
200
980
HS561-22030A
3.6
80
3.0
1.2
4.0
220
480
1400
HS561-22042A
2.94
80
4.2
0.7
2.0
220
480
1400
HS561-25030A
4.2
100
3.0
1.4
5.5
250
800
1550
HS561-28042A
2.94
100
4.2
0.7
2.5
280
800
1550
Matched Driver
• SS5 Stepper Servo Motor Driver.pdf
Find More Stepper Servo Driver
Mechanical Dimensions
Standard Leadwire Configuration
Mechanical Dimensions
Standard Leadwire Configuration
Custom Shaft Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor Planetary Gearbox Stepper Motor Spur Gearbox Stepper Motor
Connector Molex, Harwin, Tyco/AMP, JST etc.
Leadwires and Cables
Special length, Protective hose
Custom Shaft Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor Planetary Gearbox Stepper Motor Spur Gearbox Stepper Motor
Connector Molex, Harwin, Tyco/AMP, JST etc.
Leadwires and Cables
Special length, Protective hose
Full Datasheet HS561(56mm).pdf
Full Datasheet HS561(56mm).pdf
Ability:
To reduce the vibration and fluctuation in NEMA 23 stepper motor, the solution that I.CH takes is to use closed-loop format. Probably the parameter that I.CH lists is not suitable to you, but as an experienced manufacturer, we can custom.
Advantage:
1, High efficiency
2, Low vibration
3, High response
Services:
1, One-year warranty.
2, Technological instruction.
FAQ:
1, what is the step angle of NEMA 23 stepper motor?
1.8 Degree.
2, what is the inertia ratio of closed-loop stepper motor?
You can find the corresponding parameter listed from PDF.
Ability:
To reduce the vibration and fluctuation in NEMA 23 stepper motor, the solution that I.CH takes is to use closed-loop format. Probably the parameter that I.CH lists is not suitable to you, but as an experienced manufacturer, we can custom.
Advantage:
1, High efficiency
2, Low vibration
3, High response
Services:
1, One-year warranty.
2, Technological instruction.
FAQ:
1, what is the step angle of NEMA 23 stepper motor?
1.8 Degree.
2, what is the inertia ratio of closed-loop stepper motor?
You can find the corresponding parameter listed from PDF.