Item | Speci. |
Layers | 1~32 |
Board thickness | 0.1mm-7.0mm |
Material | FR-4,CEM-1/CEM-3,PI,High Tg,Rogers |
Max panel size | 32"×48"(800mm×1200mm) |
Min hole size | 0.075mm |
Min line width | 3mil(0.075mm) |
Surface finish | OSP,HASL,Imm Gold/Nickel/Ag, Electric gold |
Copper thickness | 0.5-7.0OZ |
Soldermask | Green/Yellow/Black/White/Red/Blue |
Silkscreen | Red/Yellow/Black/White |
Min PAD | 5mil(0.13mm) |
Inter package | Vacuum |
Outer package | Carton |
Outline tolerance | ±0.75mm |
Hole tolerance | PTH:±0.05 NPTH:±0.025 |
Certificate | UL,ISO 9001,ISO14001,IATF16949 |
Special request | Blind hole+Gold finger + BGA |
Material Suppilers | Shengyi, KB, Nanya, ITEQ,etc. |
What is a Double-side PCB
The double-sided PCB is acommon type of printed circuit board. It has wires and components on both thefront and back sides, and the double-sided PCB boards are connected with viasin the middle. The double-sided printed circuit board has two upper and lowerconductor patterns, and the upper and lower via holes are connected byexpensive perforations. In the processing of printed circuit boards, the holewalls of your perforated holes are coated with a copper layer to make the upperand lower layers conductive. Double-sided printed circuit boards are usuallydouble-sided copper-clad laminates, using screen printing or photo imaging. Aresist pattern is formed on the copper surface, and excess copper foil isremoved by chemical etching to form a conductor pattern.
Steps to draw double-layer PCB board
1. Prepare the circuitschematic
2. Create a new PCB file and load it into the component package library
3. Planning the circuit board
4. Load the netlist and components
5. Automatic layout of components
6. Layout adjustment
7. Network density analysis
8. Wiring rule setting
9. Automatic wiring
10. Manually adjust the wiring
After the components of the double-layer PCB are drawn in the EDA software, thewiring sequence is first designed as power line, sensitive line, high frequencyline and low frequency line. It is best to have a separate power supply for thekey lead, a ground return, and the lead is very short, so sometimes a groundwire is placed close to the signal line on the edge of the key lead to make it formthe smallest working loop.
The signal lines of thedouble-layer PCB board are the key crystal, crystal oscillator circuit, clockcircuit, CPU and other signal lines, which must comply with the principle thatthe circulating area is as small as possible.
One-stop Service Include
PCB Prototype | Quick Turn PCB | Single-Sided PCB |
Double-Sided PCB | Multilayer PCB | Rigid PCB |
Flexible PCB | Rigid-Flex PCB | LED PCB |
Aluminum PCB | Metal Core PCB | Thick Copper PCB |
HDI PCB | BGA PCB | High TG PCB |
PCB Stencil | Impedance Control PCB | PCB Assembly |
High-Frequency PCB | Bluetooth Circuit Board | Automotive PCB |
USB Circuit Board | Halogen-Free PCB | Antenna PCB |
