Integrated sodium hypochlorite generator 2
Product highlights:Salt plant, electrolysis plantRectifying equipment, water distribution system, automatic control device and medicine storage tankRaw materials used:Industrial salt (NaCl) GB / t5462-2003 refined industrial salt ≥ 99.10%Product features:1) the melting point of titanium is up to 1660 degrees.2) titanium at room temperature(below 885 degrees) is a close packed hexagonal lattice, but above 885 degrees it is BccThe volume of crystal lattice increases by 5.5%. 3) the density of titanium is about 4.51g/cm3, which is about 60% of stainless steel, more than aluminum, about 60% larger than aluminum. 4) although the tensile strength of pure titanium is 350-700mpa, the general titanium alloy can reach 700-1200mpaVery high pressure. Therefore, the specific strength of titanium alloy (i.e. the ratio of strength to density) is higher than any otherThe materials are all big. 5) the specific heat, thermal conductivity and resistivity of titanium are at the same level as that of stainless steel, but the expansion coefficient of titanium is smaller than that of steel50%. Titanium has poor thermal conductivity and conductivity, similar to stainless steel.
6) the young's modulus of titanium is smaller than that of stainless steel, and it can bend under lower stress.
7) follow the stable creep characteristics in the temperature range of 200-300.