Servo drive specifications
Basic specifications | mode | NJ001-08 | NJ001-13 | NJ001-20 | NJ001-50 |
Maximum current(A) | 10.7 | 12.7 | 18.0 | 25.0 |
Power supply | single phase AC170~253V |
| 50/60Hz |
Cooling method | Natural cooling/ fan Cooling ? |
Control method | SVPWM control |
Encoder | Provincial line or incremental encoder |
Internal functions | display and operation | Six of seven-segment display LED: four function keys |
Control model | position control / speed trial run / jog run /internal positioning PLC function/RS485 communication/ speed/ torque |
Braking function | Internally installed |
Protection function | Under voltage, over voltage, over load, over current, encoder exception, braking, position error etc. |
Position control model | Command control model | External pulse |
External command pulse input | Form | pulse+ direction cw/ccw A/B orthogonality |
Maximum frequency | Differential motion:1MHZ open collector: 200KHZ |
Electronic gear ratio | 1~32767/1~32767 |
Speed control range | speed ratio: 1:5000 |
Speed rate of change | Speed fluctuation ratio:<±0.03(load 0~99%). <±0.05(power-15%~+10%) |
Command smooth way | Linear time constant 1 ms~10000ms(0r/min←→1000r/min) |
frequency characteristic | 300HZ |
input/output signal | location signal output | output type | ABZ phase line drive output/ Z open collector output |
Frequency division ratio | 1/225~1Frequency division |
input signal | 7 points photoelectric isolation input | Input point can be defined as any 21kinds, see parameter settings |
output signal | 4 collector open | 1) location/speed reach 2) servo alarm output;3)Z signal output 4) brake output. Freely defined |
Usage temperature | Operation:0℃~55℃storage:-20℃~80℃ |