Welcome Customer !

Membership

Jiangxi Johnson Electric Co., Ltd.
Free Member ·1YRS
PingXiang,JiangXi
Manufacturer

Main Products: Insulator

Xwboo>Products

Jiangxi Johnson Electric Co., Ltd.Free·1YRS

  • E-mail

    jackwu@johnsonelectricchina.com

  • Phone

    0086-(0)799-7513666

  • Address

    Room 317,Zhongchuang Industrial,Feitian Internet,Luxi County, Pingxiang city, Jiangxi Province, China

Contact Now

20KV 660mm Long Rod Suspension Porcelain Insulator Lp705390

Model
Nature of the Manufacturer
Manufacturer
Product Category
Suspension Porcelain Insulators
Place of Origin
City, Province
Overview
Standard suspension disc insulator units are 25 centimetres (9.8 in) in diameter and 15 cm (6 in) long, can support a load of 80-120 kN (18-27 klbf), have a dry flashover voltage of about 72 kV, and are rated at an operating voltage of 10-12 kV.[14] However, the flashover voltage of a string is less than the sum of its component discs, because the electric field is not distributed evenly across the string but is strongest at the disc nearest to the conductor, which flashes over first. Metal grading rings are someti......
Product Details

20KV 660mm Long Rod ( (6)

SI ClassL8/550L10/600L10/690L9/610L10/760L5/380L7/490L14/860
Creepage Distance,mm8501000120092012005007001370
Tension Failing Strength,KN40404040404070100
Main DimensionsH550600690610760380490860
h382430510362500340440775
D145145146165185120121122
d12122232425111619
Power frequencyDry,kv140140180115180100120200
Flashover VoltageWet,kv1201201509015090100170
Impulse Flashover voltage,kv230230300185300210210320

Products Use

Each unit is constructed of a ceramic or glass disc with a metal cap and pin cemented to opposite sides. To make defective units obvious, glass units are designed so that an overvoltage causes a puncture arc through the glass instead of a flashover. The glass is heat-treated so it shatters, making the damaged unit visible. However the mechanical strength of the unit is unchanged, so the insulator string stays together.

Suspension Porcelain Insulator (3)

We use the tension clamp or strain clamp to connect the disc insulator with conduct wire together. Suspension Porcelain Insulator (4)

There are two link type according to usage in construction, one is tension type ,one is suspension type.

Standard suspension disc insulator units are 25 centimetres (9.8 in) in diameter and 15 cm (6 in) long, can support a load of 80-120 kN (18-27 klbf), have a dry flashover voltage of about 72 kV, and are rated at an operating voltage of 10-12 kV.[14] However, the flashover voltage of a string is less than the sum of its component discs, because the electric field is not distributed evenly across the string but is strongest at the disc nearest to the conductor, which flashes over first. Metal grading rings are sometimes added around the disc at the high voltage end, to reduce the electric field across that disc and improve flashover voltage.

Suspension insulators

Typical number of disc insulator units for standard line voltages

LINE VOLTAGE(KV)UNITS
34.53
694
1156
1388
16111
23014
28715
34518
36023
40024
50034
60044
75059
76560

The production process

Our factory use the technological of wet process to produce.

Suspension Porcelain Insulator (5)

Packaging

Suspension Porcelain Insulator (6)

Suspension Porcelain Insulator (8)

Suspension Porcelain Insulator (7)

Suspension Porcelain Insulator (1)


Similar Product Recommend