Welcome Customer !

Membership

Jiangxi Johnson Electric Co., Ltd.
Free Member ·1YRS
PingXiang,JiangXi
Manufacturer

Main Products: Insulator

Xwboo>Products

Jiangxi Johnson Electric Co., Ltd.Free·1YRS

  • E-mail

    jackwu@johnsonelectricchina.com

  • Phone

    0086-(0)799-7513666

  • Address

    Room 317,Zhongchuang Industrial,Feitian Internet,Luxi County, Pingxiang city, Jiangxi Province, China

Contact Now

ED-2C Low Voltage Porcelain Ceramic Shackle Insulator

Model
Nature of the Manufacturer
Manufacturer
Product Category
Shackle Insulators
Place of Origin
City, Province
Overview
Low voltage butterfly insulator low-voltage distribution 0.4kV, bare conductor span 40 ~ 60m, insulated conductor span 30 ~ 50m. According to the above checking calculation, ED-1, ed-2 and ed-3 disc insulators are basically suitable for any low-voltage conductor. Considering the size of wire diameter, 25 ~ 35 bare wires and insulated wires use ed-3; 50 ~ 120 bare conductors and 50 ~ 95 insulated conductors use ed-2; Bare conductors of 150 and above and insulated conductors of 120 and above shall use ED-1.Insulators......
Product Details

Video

Product Design Drawings

ED-2C Low Voltage Porcelain  Ceramic Shackle Insulator (6)

ed-2 D型铁图纸

ED-2C Low Voltage Porcelain  Ceramic Shackle Insulator (8)

Product Technical Parameters

Shackle insulators
Type ED-2C
Dimensions
Leakage distancemm68
Mechanical Values
Transverse Strengthkn11.4
Electrical Values
Low frequency dry flashover voltagekv25
Low frequency wet flashover voltagekv13
Packing and Shipping Data
Net weight,approximatekg0.50

Information

Low voltage line insulators are used for insulation and fixing of power line conductors with power frequency AC or DC voltage below 1KV. There are mainly needle type, screw type, spool type, tension and tram line insulator, etc. Butterfly and spool insulators can also be used for insulation and fixation of conductors on low-voltage line terminals, tension and corner rods. Tension insulator is used for insulation and connection of pole stay wire or tension conductor.

In the transmission line, the pole must bear the transverse (horizontal) tension of long straight section of wire. In order to bear this transverse tension, the construction party often uses tension insulators. In low-voltage lines (below 11kv), spool insulators are often used as tension insulators. However, for high voltage transmission lines, pin or disc insulator strings are required to be connected to the cross arm in the horizontal direction. When the tension load in the line is very high, such as at a long span, two or more insulator strings need to be used in parallel.

Product Information

Shackle insulators are divided into high-voltage Shackle insulators and low-voltage Shackle insulators.
The models of high voltage Shackle insulators are E-I, E-2, E-6 and E-10. Meaning of Pinyin in the model: e-Shackle porcelain insulator; The number after the dash indicates the rated voltage, in kV, and the new product is the overall dimension number.
The models of low-voltage Shackle insulators are: ed-i, ed-2, ed-2b and ed-3. Meaning of Pinyin in the model: ed - low voltage Shackle insulators; Numeric table after dash
The product size code is shown.

详情2
154131

Similar Product Recommend