Welcome Customer !

Membership

Jiangxi Johnson Electric Co., Ltd.
Free Member ·1YRS
PingXiang,JiangXi
Manufacturer

Main Products: Insulator

Xwboo>Products

Jiangxi Johnson Electric Co., Ltd.Free·1YRS

  • E-mail

    jackwu@johnsonelectricchina.com

  • Phone

    0086-(0)799-7513666

  • Address

    Room 317,Zhongchuang Industrial,Feitian Internet,Luxi County, Pingxiang city, Jiangxi Province, China

Contact Now

High Voltage Suspension Toughed Glass Insulator

Model
Nature of the Manufacturer
Manufacturer
Product Category
Glass Insulators
Place of Origin
City, Province
Overview
Glass insulators do not require periodic live preventive tests on insulators during operation. This is because each damage of tempered glass will cause the damage of insulator, which is easy to be found by operators during line inspection. When the insulator is damaged, the glass fragments near the steel cap and iron foot are stuck, and the mechanical strength of the remaining part of the insulator is sufficient to prevent the insulator string from breaking off.Due to the high mechanical strength of the surface lay......
Product Details

Product Design Drawings

High Voltage Glass Insulator (8)

Product Art Photos

High Voltage Glass Insulator (9)

High Voltage Glass Insulator (7)

High Voltage Glass Insulator (6)

High Voltage Glass Insulator (5)

玻璃串

Product Technical Parameters

IEC designationU40B/110U70B/146U70B/127U100B/146U100B/127U120B/127U120B/146U160B/146U160B/155U160B/170
Diameter Dmm178255255255255255255280280280
Height Hmm110146127146127127146146155170
Creepage distance Lmm185320320320320320320400400400
Socket couplingmm11161616161616202020
Mechanical failing loadkn407070100100120120160160160
Mechanical routine testkn20353550506060808080
Wet power frequency withstand voltagekv25404040404040454545
Dry lightning impulse withstand voltagekv50100100100100100100110110110
Impulse puncture voltageP.U2.82.82.82.82.82.82.82.82.82.8
Power frequency puncture voltagekv90130130130130130130130130130
Radio influence voltageμv50505050505050505050
Corona visual testkv18/2218/2218/2218/2218/2218/2218/2218/2218/2218/22
Power frequency electric arc voltageka0.12s/20kA0.12s/20kA0.12s/20kA0.12s/20kA0.12s/20kA0.12s/20Ka0.12s/20Ka0.12s/20Ka0.12s/20Ka0.12s/20Ka
Net weight per unitkg2.13.63.544446.76.66.7

Product advantages and disadvantages

1. Glass insulator

Advantages: the mechanical strength of the surface layer of glass insulator is high, the surface is not easy to crack, and the aging speed is slow; It can cancel the live periodic preventive test of insulators during operation, and there is no need to carry out "zero value" detection during operation, so the operation and maintenance cost is low.

Disadvantages: due to the transparency of glass, it is easy to find small cracks and various internal defects and damages during appearance inspection.

2. Ceramic insulator

Advantages: good chemical stability and thermal stability, strong anti-aging ability, good electrical and mechanical properties, and flexible assembly.

Disadvantages: defects are not easy to be found, and they begin to be found only after several years of operation; The zero value detection of ceramic insulators must be carried out one by one on the tower, which requires a lot of manpower and material resources; The probability of accidents caused by lightning stroke and pollution flashover is high.

3. Composite insulator

Advantages: small size, easy maintenance; Light weight and easy installation; High mechanical strength, not easy to break; Excellent seismic performance and good pollution resistance; Fast production cycle and high quality stability.

Disadvantages: anti aging capability is not as good as ceramic and glass insulators, and the production cost is higher than that of ceramic and glass insulators.

585cbf616b5040379103ad3624bfc715

Scope of use and specification

1 scope
This standard specifies the general technical requirements, selection principles, inspection rules, acceptance, packaging and transportation, installation and operational maintenance, and operational performance testing for ac overhead line insulators with nominal voltages above 1000V.

This standard is applicable to disk-type suspended porcelain and glass insulators (insulators for short) used in ac overhead power lines, power plants and substations with nominal voltage above 1000Y and frequency 50Hz. The altitude of the installation site must be lower than 1000m, and the ambient temperature must range from -40 ° c to +40 ° c. 2 Normative reference files

The following documents contain provisions which are referred to in this International Standard. All subsequent amendments (excluding errata) or revisions to dated referenced documents do not apply to this standard; however, parties to agreements under this Standard are encouraged to study the availability of the latest version of these documents. For undated references, the latest version applies to this standard. GB311.1-1997.
Insulation coordination for high voltage transmission and transformation equipment (NEQ IEC 60071-1∶1993) GB/T772-2005

Technical specifications for porcelain high-voltage insulators GB/T775.2 -- 2003
Insulators - Test methods - Part 2: Electrical test methods GB/T775.3-2006
Insulators - Test methods - Part 3: Mechanical test methods GB/T 1001.1 2003
Overhead line insulators of nominal voltages above 1000V - part 1; Definitions, test methods and criteria for ceramic or glass insulator elements for use in alternating current systems (MOD IEC 60383-1) GB/T 2900.5 2002

Electrical terminology for insulating solids, liquids and gases [EQV IEC60050 (212) : 1990] GB/T 2900.8 1995
Electrical terminology insulators (EQV IEC 60471) GB/T 4056
Structure and dimensions of suspension insulators for high voltage lines (EQV IEC 60120) GB/T 4585-2004
Manual pollution test for high voltage insulators for use in ac systems (IDT IEC 60507; 1991). GB/T7253
Insulators - ceramic or glass insulator elements for use in ac systems for overhead line insulators with nominal voltages above 1000V - characteristics of disk-type suspension insulator elements (mod IEC 60305∶1995)

DLT 557-2005

Impact breakdown testing in air for high voltage line insulators -- Definitions, test methods and criteria (MOD IEC 61211:2002) DLT 620
Overvoltage protection and insulation coordination for AC electrical installations DLT 626-2005
Test practice for degraded disc suspension insulators DL/T 812 -- 2002
Test method for arc requirements for string insulators for overhead lines with nominal voltages above 1000V (eqv IEC 61467:1997) DL/T 5092-1999
Technical specification for design of 110kV ~ 500%kV overhead transmission lines JB/T3567-1999
Test method for radio interference of high voltage insulators JB/T 4307-2004
Cement cement JB/T 5895 -- 1991 for insulator adhesive installation
Guidelines for use of insulators in polluted areas JB/T 8178--1995
Specification for iron caps of suspension insulators - Locking pins for ball-and-socket connections of insulator string elements JB/T 8181-1999
Steel pin JB/T 9677-1999 for disc-type suspension insulators
Exterior quality of glass parts for disc-type suspension glass insulators
JB/T9678-1999

Product Application

Pictures from the Internet

image1.nowec
5b0988e5952sohucs
jy168

Similar Product Recommend