-
E-mail
jcliu@aiwovalve.com
- Phone
-
Address
Xiaohuangzhuang District Tianjin city China
Membership
Help
Tianjin Aiwo Valve Co., LtdFree·1YRS
jcliu@aiwovalve.com
Xiaohuangzhuang District Tianjin city China
Size: DN40-DN1200/1.5″-48″
Pressure: 5K/10K/150LB
Standard: API 609, MSS SP-67,ANSI B16.1 CLASS125, BS4504 PN10/PN16
Valve Design: API 609, MSS SP-67
Face To Face: API 609, MSS SP-67, DIN3202, BS EN558-1
Pressure Test: API 598
Flange Drilling: ANSI B16.1 class125, BS4504 PN10/PN16, DIN2501 PN10/PN16
Top Flange: ISO5211
| No. | Item | Material | |||||||||
| 1 | Gasket | O-Ring,PTFE,Asbestios Sheet | |||||||||
| 2 | Bushing | Self-lubricating Bronze,PTFE,Stainless Steel | |||||||||
| 3 | Body | Gray Cast iron,Ductile iron,Cast steel,stainless steel,Nickel-chromium alloy iron,Carbon steel | |||||||||
| 4 | Seating Ring | NBR,EPDM,PTFE,VITON,SBR | |||||||||
| 5 | Disc | Gray Cast iron,Ductile iron,Cast steel,stainless steel,Nickel-chromium alloy iron,Carbon steel | |||||||||
| 6 | Shaft | 2Cr13,1Cr18Ni9Ti,304,316,316L | |||||||||
| 7 | Shaft Pin | 2Cr13,1Cr18Ni9Ti,304,316,316L | |||||||||
| 8 | Packing | NBR,EPDM,PTFE,VITON,Flexible graphite | |||||||||
| 9 | Packing Gland | Ductile iron,Carbon steel,stainless steel,Bronze | |||||||||
| 10 | Worm Gear | Cast iron,Ductile iron,Carbon steel | |||||||||
| 11 | Hand Wheel | Ductile iron,Malleable cast iron,Carbon steel | |||||||||
1.The product side flange complies with many national and international standards such as GB, DIN, ANSI, BS, JIS,etc.
2.Valve body procurement QT450-10 material, spheroidization rate of 3 or more, mechanical properties fully up to standard, tensile strength 450Mpa, elongation rate greater than 10%, not easy to crack, crack.
3.The valve body is solid body, the same DN weight is heavier than other manufacturers.
4.Seat rubber uses standard EPDM rubber, making the butterfly valve’s resilience and tension super stable and reliable, opening and closing more than 10,000 times without leakage.
5.The valve body uses an electrostatic powder thermal spraying process with a spray thickness of 250μm. The valve body is heated at 200°C for 3 hours, and the powder is cured at 180°C for 2 hours. After natural cooling, the surface adhesion is increased by 2 times than that of the ordinary powder, making it more environmentally friendly and weatherproof. Higher, to ensure that the valve body is not discolored for 36 months;
6.Pneumatic head adopts double-piston rack structure, precise meshing, high efficiency and constant output torque.
7.The cylinder body is an extruded aluminum alloy and hard anodized. The inner surface has a hard texture and high strength and hardness. The use of low-friction materials made of sliding bearings, to avoid direct contact between the metal, low friction coefficient, flexible rotation, long service life.
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by client.