Welcome Customer !

Membership

Nanjing KJT Electric Co., LTD
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: Thermal Sensor|Other Sensors

Xwboo>Products

KJT-3030AN-LY Speed Sensors High Output VRS 15kHz 56mm

Model
Nature of the Manufacturer
Manufacturer
Product Category
Variable Reluctance Speed (VRS) sensors
Place of Origin
City, Province
Overview
KJT-3030AN-LY Speed Sensors High Output VRS 15kHz 56mm
Product Details

High Output VRS sensors are designed for use in applicationswhere higher output voltages are needed. They perform best atlow to medium speeds with medium to high impedance loads.Front-End Sealed versions are available for use where thesensor is exposed to fluids, lubricants or adverseenvironmental conditions.Passive VRS (Variable Reluctance Speed) Magnetic Speedsensors are simple, rugged devices that do not require anexternal voltage source for operation.A permanent magnet in the sensor establishes a fixedmagnetic field. The approach and passing of a ferrous metaltarget near the sensor’s pole piece (sensing area) changes theflux lines of the magnetic field, dynamically changing itsstrength. This change in magnetic field strength induces acurrent into a coil winding which is attached to the outputterminals.The output signal of a VRS sensor is an ac voltage that variesin amplitude and wave frequency as the speed of themonitored device changes, and is usually expressed in peak topeak voltage (Vp-p).One complete waveform (cycle) occurs as each target passesthe sensor’s pole piece. If a standard gear were used as atarget, this output signal would resemble a sine wave if viewedon an oscilloscope.KJT also offers VRS sensors for general purpose, poweroutput, high resolution, high temperature, and hazardouslocation applications, as well as low-cost molded versions.