Welcome Customer !

Membership

Nanjing KJT Electric Co., LTD
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: Thermal Sensor|Other Sensors

Xwboo>Products

KJTDQ-3090A35-LY Speed Sensors Hazard Location VRS 40kHz 122mm

Model
Nature of the Manufacturer
Manufacturer
Product Category
Variable Reluctance Speed (VRS) sensors
Place of Origin
City, Province
Overview
KJTDQ-3090A35-LY Speed Sensors Hazard Location VRS 40kHz 122mm
Product Details

DESCRIPTION Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required.Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. KJT also offers VRS sensors for general purpose, high output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions.

KJT-3090A35-LY Speed Sensors Hazard Location VRS 40kHz 122mm