Welcome Customer !

Membership

Nanjing KJT Electric Co., LTD
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: Thermal Sensor|Other Sensors

Xwboo>Products

KJTDQ-KJT-EV58S25-LY - VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2...

Model
Nature of the Manufacturer
Manufacturer
Product Category
Variable Reluctance Speed (VRS) sensors
Place of Origin
City, Province
Overview
KJTDQ-KJT-EV58S25-LY - VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread & 39" Leads Variable Reluctance Speed (VRS) sensor
Product Details

The KJT-EV58S25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet and an amplifier. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The signal is converted to a square wave signal with constant amplitude by the integrated amplifier. The frequency of the output signal is proportional to the speed of the moving target.

Features:

  • Signal Output: Square wave signal from NPN output transistor with internal 2.2 kOhm pull-up resistor, DC-coupled to supply

  • Thread Length: 2.5" 5/8-18 UNF-2A thread

  • 5-32 DCV Supply Voltage

  • 5 mA (without load) maximum current consumption

  • 0-20 kHz Frequency Range

  • Housing: 5/8"-18 UNF-2A, tightening torque: max. 35 Nm

  • Connection: 39" Cable with open leads, 3-wire, AWG22, stranded wires, elastomer isolation, green casing

  • Coil Inductance: 170 mH +/-10% at 1 kHz

  • Coil Resistance: 850 Ohm +/-10%

  • Coil Magnet Polarity: North pole towards front face

  • Operating Temperature: -104-257°F (-40-125°C)

  • Protection: IP68 (Sensor) / IP67 (Cable)

  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

  • VRS Sensors

  • Leads