Long lifetime, fast response,high vibration forceMotor Diameter:10mmMotor Thickness: 30mmRated voltage: 3.0V
Product Details
Introduction for our Linear Motor 1030:
A linear resonant actuator is a precision vibration motor that produces an oscillating force across a single axis. Unlike a DC eccentric rotating mass (ERM) motor, a linear vibration motor relies on an AC voltage to drive a voice coil pressed against a moving mass that is connected to a spring. When the voice coil is driven at the resonant frequency of the spring, the entire actuator vibrates with a perceptible force. Although the frequency and amplitude of a linear resonant actuator may be adjusted by changing the AC input, the actuator must be driven at its resonant frequency to generate a meaningful amount of force for a large current.
1) Vibrating in direction Z with a very long life time of 1 million cycles at the test mode 1s On 0.5s Off as one cycle.
2) With very strong acceleration/ vibration force at its peak acceleration value around 1.0Grms Min, much stronger than other normal brush type coin motors at 0.6-0.8G usually.
3) Users need to add IC drivers in the PCB to activate these motors.
4) Specially for high-end and high reliable electronic consumer products.
Electrical performance:
Model
motor size (mm)
Rated Vol.
Frequency
Rated Current
Direction of vibration
Acceleration/
Operating Voltage
Diameter
Thickness
V DC
Hz
mA
/
G
V DC
LRA1030BE03L100
10.0
3.0
AC 2.0Vrms
205
≤80mA rms
Z axis
1.0Grms Min
0.1~2.0VrmsAC
Drawing for Linear Motor 1030
Notes: The adhesive sponge or adhesive tape could be removed. Connectors could be added to the lead wires. Please negotiate before making samples for any specific requirements.
LRA structure:
Packing and Shipping Details
100pcs per tray, 8000 pcs per carton Carton size: 46cm*28.5cm*30.5cm Gross weight: 8.0kgs/ carton Inner box bubble, then carton. And then reinforced with plastic pallet for outer packing. Or according to client's requirement.
Samples Can be shipped within 10 days.
Mass production order leading time according to the actual situatio.
FAQ
Q: Can you provide accessories like cables, connector, gear, encoder etc.?
A:Yes, we can. If those are not standard, extra cost for moulding might be needed.
Q: What kind certifications you can provide?
A: ROHS is the basic certification. For others, part of them we can provide REACH, etc. For others, extra cost might be needed if we need to provide.
Q: Can I place a credit order via Alibaba directly without commnication with you? A: I am afraid NOT except for those online wholesales products which you can see specific price for certain range. We are not retailer and if there is no further order which can meet our MOQ, we can't provide any sample even you pay.
Q: How long is your delivery time? A: For samples, 5~15days. For orders, 20-35 days depends on quantity and requirements.