This is our 0610 conmmon through-hole vibraton motor.Customized service is available,the MOQ base on 30K PCS.
Product Details
Electrical performance of Through-Hole Assembly Motor
MPN
IND-YZ0610J-2750
Rated Voltage
3.0V DC
Rated Current
≤140mA
Rated Speed
11500±2000RPM
Operating Voltage
2.0-3.7V DC
Starting Current
≤200mA
Starting Voltage
≤1.6V DC
Operating Temperature
-30°C ~ +70°C
Unmarked tolerance
±0.1mm
Axial End Play
0.05~0.3mm
Outline Drawing
Application:
You could find the right haptic solution with our below various vibrators:
7-10mm diameter coin type brushed vibration motors.
3-4mm height reflow solderable SMD type vibration motors.
4-7mm diameter cylinder type brushed vibration motors.
5-9 diameter coin type brushless vibration motors.These BLDC Motors have much longer lifetime than the normal brush type motors. At the test mode of 0.5s On 0.5s Off as one cycle, total lifetime can be 1 million cycles.
8-9 diameter coin type linear vibration motors. Vibrating in direction Z, vibration force at its peak acceleration value around 1.8G, much stronger than other normal brush type coin motors at 0.6-0.8G usually.
Production Capacity
INEED production line adopts worldwide advanced equipment with automation rate about 75%. Self-develop all kinds of production jigs.
Efficiency increased by 20% every year in recent years. With monthly output more than 20 million motors. And we now produce 50 million
motors annually to customers from all over the world.
Quality Target
1.Qualification rate of first acceptance check PQC→OQC: ≥99%
2. Qualification rate of finished products OQC: 99%
3.Defective ratio on customer production line DPPM: ≤200PPM
4.Customer Satisfaction: ≥99%
Our certificate
FAQ
What are the methods of changing the speed of micro DC motor?
1. Changing the main flux of the motor can only weaken the flux, so that the motor can change speed upward from the rated speed. It is a constant power speed regulation method, with slow dynamic response, and can be stepless smooth speed regulation, but the speed range is small.
2. Change the armature circuit resistance R in the motor armature series resistance to speed, only step speed, poor smoothness, soft mechanical characteristics, low efficiency.
3. Adjust the armature voltage.Changing the armature voltage to change the speed, is a constant torque speed regulation method, dynamic response is fast, suitable for requiring a large range of stepless smooth speed regulation system.