24kV Air Insulated Switchgear

KYN28 indoor metal-clad withdrawable switchgear(hereafter short as switchgear) is a complete power distribution device for 3.6~24kV, 3 phase AC 50Hz, single bus sectionalized system. It is main used for power transmission of middle/small generators in power plants, power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc, so as to control, protect and monitor the system. The switchgear meets IEC298, GB3906-91. In addition to be used with domestic VS1 vacuum circuit breaker, it can be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc. It is truly a power distribution deviece with good performance. In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.

KYN61-40.5( same as unigear Z3 .2) ai-insulated metal-clad withdrawable switchgear( hereinafter as "switchgear") is a kind ofMV switchgear. It is designed as withdrawable module type panel, and the withdrawable part is fitted with VD4-3 6E. VD4-40.5withdrawable vacuum circuit breaker manufactured by Cooper Nature company. It can also be fitted with isolation truck, PTtruck, fuses truck and so on. It is applicable to three phase AC 50/60 Hz power system, and mainly used for the transmission anddistribution of electrical power and control. protection, monitoring ofthe circuit.

 

Standards and specifications
IEC60694 The common technical requirements ofhigh voltage switchgear and controlgea

IEC62271-200 A.C.metal enclosed switchgear and controlgear at the rated voltage of 1kV~52kV

IEC62271-100 High voltage switchgear and controlgear-Part 100:Hi gh voltage A.C. circuit breaker

GB3906 3.6~ 40.5kV alternating current metal enclosed switchgea r and controlgear
GB1984 High voltage alternating current circuit breaker
GB/T11022 The common technical requirements of high voltage switchgear and controlgear
DL/T404 3.6~ 40.5kV alternating current metal enclosed switchgear and controlgear