Metal Tube Laser Cutter 3 Chucks

2020 New Design 3 Chucks Zero Tailing Metal Tube Laser Cutting Machine

MAIN ADVANTAGES

1. 3 Chucks New Design, China's leading technology, cut small and long tube fastly ,no deformation and higher precision.

2. Zero Tailings Cutting, improve material utilization and save cost greatly.

3. Segmental automatic feeding and cutting, longer metal tube cutting are available , no tube vibration, better cutting effect.

4. Automatic loading and unloading system, higher degree of automation, saving labor.

5. Automatic centering large aperture chuck(patented technology), 10 mm -450 mm tubes are available.

6. Round pipe, square pipe, rectangular pipe, Angle steel, channel steel, H steel, C steel ,special shaped pipe etc are available.

7. World top fiber laser source,smaller focusing spot and better beam quality.

8. More fine cutting lines, smoother incision, no burr, no deformation, no need secondary polishing.

9.Top FSCUT 5000B (3-chuck 7-axis) control system, higher holing precision, faster tube corner cutting, better cutting quality.

10. Professional sixth generation of 3D cutting software and nesting software, more simple and convenient operation.

MANUFACTURING PROCESS

As shown in the figure, from left to right are Chuck A, Chuck B, chuck C. All three chuck are movable chucks.

1. Chuck A and Chuck B clam the pipe, then laser cutting , chuck A feeds the pipe forward further.

2. When the pipe cutting is in half, C chuck clamps the pipe to prevent the pipe from shaking.

3. When cutting to the end of the metal pipe, chuck A loosen and return to the starting point, chuck B move to the right region of the laser head,then tailing cutting with the clamping of the Chuck B and Chuck C.

4. After the tailing cutting finished, the B chuck and C chuck release and return. The finished workpieces unload through the automatic unloading system.