LP-4020D Fiber Laser Cutting Machine With Full Cover & Exchange Table

LP-4020D Fiber Laser Cutting Machine With Full Cover & Exchange Table

Precitec Laser Head

Cast Aluminum Gantry

FAQ

Q1. How to maintain the fiber laser cutting head?

(1). The nozzle should be checked once a day

(2). The protective lens should be checked every day. If there is dust, wipe it. If there are cracks, please use new ones.

(3). Focus lens and collimator should be carefully checked once a week. However, no dust environment is required for inspection.

(4). Before starting the machine, please remember to check the straightness of the laser beam.

Q2. How to extend the service life of laser cutting machine?

(1). Maintenance of cooling system

The water inside the water cooler needs to be replaced regularly, and the general replacement frequency is one week.

(2). Keep the water flowing at any time.

(3). Maintenance of dust removal system

Fan maintenance cycle: about one month.

(4). Maintenance of transmission system

Clean the dust on the guide rail, then lubricate the guide rail with lubricating oil, grease the rack, and fill the bearings regularly.