WenZhou，ZheJiang-
E-mail
jonsonchai@chinahaivo.com
-
Phone
0086-577-62836929,0086-577-62836926
-
Address
Chongshi Industrial Zone,Panshi，Yueqing, Zhejiang, China
Product Categories
- Heat shrinkable cable joint & termination kits
- High Voltage Current-Limiting Fuse
- Hardware Fittings of Distribution & Transmission
- Expulsion Fuse Cutout
- Porcelain Insulator
- Fuse links for expulsion fuse cutout
- Cold shrinkable cable joint & termination kits
- Composite Insulator
- Separable connectors
- Cast Resin Straight-Through Cable Joint
- Insulation Piercing Multi Core Branch Connectors
- Surge Arrester
- Disconnect Switch and Load Break Switch
Haivo Electrical Co.,LtdFree·1YRS
BLMT Aluminum Mechanical Terminal Cable Lugs with Shear Off Head Bolt
NegotiableUpdate on October 05
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Hardware Fittings of Distribution & Transmission
- Place of Origin
- City, Province
Overview
Product Details
Product Description
Technical Requirements
Material:
Aluminium alloy
Surface treatment:
Acid cleaning or tin plated
Product property:
It use spanner instead of hydraulic tool to finish installation.The special eccentric design for round conductor ensures enough anti-wrench strength and conductivity.The bolt has two shear ends A and B(Note:A is shorter than B). The boltsａnd nuts are specially designed to install on large range of conductors.When installing,you can choose the suitable end and tighten it until it breaks.The barrel capped is filled with joint compound to avoid oxidization.ａnd its type test is in accordance with IEC61238-1.
Material:
Aluminium alloy
Surface treatment:
Acid cleaning or tin plated
Product property:
It use spanner instead of hydraulic tool to finish installation.The special eccentric design for round conductor ensures enough anti-wrench strength and conductivity.The bolt has two shear ends A and B(Note:A is shorter than B). The boltsａnd nuts are specially designed to install on large range of conductors.When installing,you can choose the suitable end and tighten it until it breaks.The barrel capped is filled with joint compound to avoid oxidization.ａnd its type test is in accordance with IEC61238-1.
| SPEC. | CONDUCTOR CROSS-SECTION(mm2) | NO. OF SHEAR HEAD BOLT | AF | D1 | D2 | L1 | L2 | LB |
| BLMT-25/95-13 | 25-95 | 1 | 13 | 24 | 12.5 | 60 | 30 | 13 |
| BLMT-35/150-13 | 35-150 | 1 | 17 | 28 | 16 | 86 | 35 | 13 |
| BLMT-95/240-13 | 95-240 | 2 | 19 | 33 | 20 | 112 | 60 | 13 |
| BLMT-120/300-17 | 120-300 | 2 | 22 | 37 | 24 | 115 | 65 | 13 |
| BLMT-185/400-17 | 185-400 | 3 | 22 | 42 | 25.5 | 137 | 80 | 17 |
| BLMT-500/630-21 | 500-630 | 3 | 27 | 50 | 33 | 150 | 95 | 21 |
Similar Product Recommend