15kV 630A / 20kV 630A High Quality Silicone Rubber Lnsulated Cap

NegotiableUpdate on October 05

Model

Nature of the Manufacturer: Manufacturer

Product Category: Separable connectors

Place of Origin: City, Province

Online Consult Contact Information

Overview

Plug type accessories,also named Separable Connectors.It includes separable Elbow,straight and Tee connector kits.Our separable connectors are widely used in switchgears,transformers,cabinets and other electrical equipments.It is made of EPDM or silicone rubber with integrated field control.And adopts advanced triple-layer( a conductive inner layer,an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge max......

Product Details

IEC type Separable Connectors and Kits

Executive standard

EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems

Voltage characteristics

95m4_02

Current characteristics

95m4_04

IEC type Separable Connectors application solution

95m4_06

15kV 630A / 20kV 630A lnsulated cap

Summary

630A insulated cap is an accessories of live bushing, which provides insulating cover protection for the live bushing, and provides a dust-proof and moisture-proof protection for the nonelectrified connector.
630A insulated cap can be installed on the 630A bushing and busbar or other equipments, when the cable wiring reserved backup connectors, it must be sealed with a 630A insulated cap.
630A insulated cap made of high quality silicone rubber, fully insulated, fully sealed, safe and reliable.

Description of type

95m4_03

Model & Specification

95m4_06_0u91

95m4_07

Standard packing
Body of insulated cap
Instruction Manual
Silicone grease
Conformity certificat
Towels

Packing list
3 pcs/ carton G.W：1.8kg Carton size：25cm×21cm×11cm

Product structure
1、Insulating layer: special formula and mixing technology to ensure high quality of prefabricated silicone rubber.
2、Internal semi conductive layer: prefabricated inner semi conductive layer to effectively control the stress of electric field.
3、Outer semi conductive layer: The prefabricated outer semi conductive layer adheres closely to the insulating layer and ensures that the outer semi conductive layer is grounded.
4. Operating ring: made of stainless steel and more easy for installation and operation.
5. With the thread: thread size metric coarse thread M16.
6、Grounding hole: Pre-wired to the outer shield for ground wire connection.