15KV/25KV IEEE Rear Connector With Surge Arrester

NegotiableUpdate on October 05

Model

Nature of the Manufacturer: Manufacturer

Product Category: Separable connectors

Place of Origin: City, Province

Online Consult Contact Information

Overview

Plug type accessories,also named Separable Connectors.It includes separable Elbow,straight and Tee connector kits.Our separable connectors are widely used in switchgears,transformers,cabinets and other electrical equipments.It is made of EPDM or silicone rubber with integrated field control.And adopts advanced triple-layer( a conductive inner layer,an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge max......

Product Details

IEEE type Separable Connectors and Kits

Executive standard

EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems

Voltage characteristics

95m4_14

Current characteristics

95m4_16

IEEE type Separable Connectors application solution

95m4_18

15kV/20kV IEEE Rear connector with surge arrester

Summary

IEEE Rear connector with surge arrester can provide reliable over-voltage protection for the electrical system. The external semi conductive Layers of screened type IEC Rear connector with surge arrester to ensure protect the operators when installation and maintenance,ａnd also ensure the equipments in safety.At the same time, its anti ultraviolet, anti-aging, waterproof, moisture-proof unique properties to ensure that the product in a harsh environment safe and reliable operation.

Description of type

95m4_36

Model & Specification

Note: When Selection,Please indicate the lightning impulse residual voltage value.

Standard packing

Body of surge arrester
Silicone grease 、 towels
Instruction Manual
Conductive rod
Yest report
Conformity Certificat
Bolt stud
Dust cap

Packing list

3 pcs/ carton G.W：1.8kg Carton size：25cm×21cm×11cm