FZ(R)N21-12 indoor vacuum load break switch(LBS) and fuse combination, are suitable for AC 50Hz power system with rated voltage 12kV.It is widely used in urban network construction and reconstruction projects, industrial and mining enterprises, high-rise buildings and public...
Product Details
FZRN21-12D
FZ(R)N21-12(D) indoor vacuum load break switch(LBS) and fuse combination, are suitable for AC 50Hz power system with rated voltage 12kV.It is widely used in urban network construction and reconstruction projects, industrial and mining enterprises, high-rise buildings and public facilities. As a ring network power supply and terminal equipment, the LBS plays the role of power distribution, control and protection of electrical equipment,which is especially suitable for oil free, no maintenance and frequent operation.The technical performance of the product conforms to IEC60266-1, IEC2042, GB16926, GB3804 standard.
AMBIENT CONDITION
1 Ambient air temperature does not exceed 40 ° C, and the average value measured within 24h does not exceed 35 ° C, is low ambient air temperature is -25 ° C;
2 The effects of solar radiation can be ignored;
3 The altitude does not exceed 1000m;
4 The surrounding air is not significantly contaminated by dust, smoke, corrosive or flammable gases, steam or salt spray;
5 The daily average value of relative humidity does not exceed 95%; the daily average value of water vapor pressure does not exceed 22 kPa; the monthly phase humidity does not exceed 90%; the average monthly water vapor pressure does not exceed 18 KPa;
6 The vibration or ground power from outside the switchgear and control equipment is negligible;
PRODUCT FEATURE
1. Adopting vacuum arc extinguishing chamber, which has strong arc extinguishing ability, reliable performance and safety.
2. The vacuum LBS is integrated with the direct acting isolating switch and the operating mechanism, which is easy to operate. The opening and isolation are completed at one time, with obvious fracture. It can be equipped with grounding switch and interlocked with the switch.
3. It is easy to operate, can be operated manually and electrically, and has reliable interlocking in all functions, which is convenient for the joint sheath design of the switch cabinet.
4. Full insulation design is adopted, and each charged body is installed in the insulation support frame. The unique design of cone type insulation base and transparent glass cover makes the incoming bus isolated from the switch.
5. Flexible installation, easy maintenance. The fuse replacement is convenient.