HFW-24 pole-mounted load break switch is used in outdoor 24kV ,3 phase AC 50Hz distribution network to open and close load current and short circuit current.This load switch can separate those broken distribution line automatically.
Product Details
As shown above:Rubber bushing terminal type;
As shown above:Porcelain bushing cable outlet type
HFW-24 outdoor high voltage column type SF6 gas load break switchis used in outdoor 24kV ,three phase AC 50/60Hz distribution network to open and close load current and short circuit current.This load switch can separate those broken distribution line automatically.It has the advantages of free maintenance, long life, small size, light weight, small occupation, low project cost and wide application.
With the latest technology, it has thenewest electronic controller. The switch can be used by manual operation, electric operation and operationfrom a long distance. Electric controller is installed in a stainless steel cabinet which is suitable for usingunder all kinds of climatic conditions. In addition, there are some wired and wireless modem installed in thecabinet through which it can realize the remote monitoring and control. Simple installation on column isconvenient, fast, and also can reduce the construction cost.
In order to adapt to different working environment, the switch can be configured with different discharging mode .
Porcelain bushing terminal type;
Rubber bushing terminal type;
Porcelain bushing cable outlet type;
Rubber bushing cable outlet type).
Ambient temperature
1 Ambient air temperature: +50℃ to -40℃.
2 Relative humidity:99%
3 Elevation does not exceed 3000m.
4 The pressure does not exceed 700pa(wind speed of 34m/s).
5 Earthquake intensity:8 degrees.
6 Installation site:No fire, no explosion hazards, no chemical corrosion and recurrent severe vibration.