HFW-40.5 outdoor pole mounted SF6 insulated load break switch is suitable for the distribution network with rated voltage of 12 / 24 / 40.5kV, rated current of 630A, frequency of 50 / 60Hz to open and close the load current and overload current in the power system, which can automatically isolate the fault distribution line section.
Product Details
PRODUCT INTRODUCTION
HFW40.5 outdoor pole mounted SF6 insulated load break switch is suitable for the distribution network with rated voltage of 40.5kV, rated current of 630A, frequency of 50 / 60Hz to open and close the load current and overload current in the power system, which can automatically isolate the fault distribution line section. The load break switch shell adopts the high-quality 304 stainless steel molding process. In addition to its excellent mechanical properties, its annual air leakage rate and other technical parameters are far superior to the national standard.
The switch is equipped with a technical electronic controller, which can be operated manually, electrically and remotely. The electronic controller is installed in the stainless steel box, which can be used under various climatic conditions. In addition, wired and wireless modems can be installed in the cabinet, which can realize remote monitoring and control. Simple column installation layout is convenient and fast, reducing construction cost.
MAIN FEATURES OF THE PRODUCT
1. SF6 gas insulation: SF6 gas is non-toxic, non combustible electrical insulation gas, with excellent arc extinguishing characteristics.
2. Sleeve diversity: porcelain sleeve or rubber insulated sleeve are optional.
3. Visible open / closed state:it is easy to see color-coded switch to division and position indicator standing on the ground (Green - off; red -closed)
4. The spring energy storage operating mechanism ensures fast closing and opening operation.
5. It can realize remote control: it is equipped with electronic controller, which can be operated on the spot or on the console with FTU interface.
Rubber bushing terminal outlet
Porcelain bushing terminal outlet
Porcelain bushing- molded cable outlet
TECHNICAL SPECIFICATION
Rated voltage
kV
40.5
Rated frequency
Hz
50/60
Rated insulation level (charged SF6 gas 0.05MPa/20℃)
Lightning impulse withstandvoltage(peak)
Phase to phase, to earth
kV
185
Across open contacts
215
1min P.F withstand voltage
Phase to phase, to earth
95
Across open contacts
110
Raining withstand voltage test
70
Insulation level under zero gauge pressure 1min P.F withstand voltage