Vacuum interrupter is a kind of high-voltage vacuum electrical component with vacuum as insulation and arc extinguishing medium.It USES the principle of instantaneous arc extinguishing when the current passes zero to realize current breaking.The vacuum interrupter is the heart of the vacuum switch and an indispensable part of the vacuum switch.
Product Details
Vacuum interrupter is a kind of high-voltage vacuum electrical component with vacuum as insulation and arc extinguishing medium.It uses the principle of instantaneous arc extinguishing when the current passes zero to realize current breaking.The VI is an indispensable part of the vacuum switch.
From the basic structure of VI, its insulation mainly depends on the shell made of glass, ceramics or glass ceramics,which is also used as the support of the vacuum interrupter. In this way, the insulator can be divided into the external insulation part exposed to the atmosphere and the internal insulation part in the vacuum state.
The external insulation relies on air as the insulation medium, so the requirements for the external insulation performance are not very high under the normal environmental conditions.However, when it is used in high altitude areas and special outdoor environments, it requires high external insulation performance. This is because the pressure resistance of the vacuum interrupter will be reduced in the area with altitude higher than 1000m and lower than 3500m due to the low atmospheric pressure. The environmental temperature, humidity, pollution, heavy rain and other factors will also cause the insulation performance of the vacuum interrupter insulating parts to decline. In order to improve the external insulation performance of vacuum interrupter, there are two common methods:
1. put the vacuum tube into the container, and fill the container with insulating medium, such as sf6 gas, silicone grease, transformer oil, etc.
2. A silicone rubber sleeve is further installed outside the ceramic shell to increase the creepage distance to improve the external insulation performance of the vacuum interrupter.The specific method is: first, the silicone rubber is made by high temperature vulcanization and injection molding, and then the silicone rubber sleeve is bonded to the outside of the vacuum tube with the adhesive to form the outer sleeve structure.
POINTS FOR ATTENTION
1.The packed vacuum interrupter can be transported by car, train and plane. During vehicle transportation, the allowable bumpiness is equivalent to that of the third level road of the vehicle running at the speed of 20km / h, which shall be handled with care during loading and unloading, and shall not roll or collide.
2. The product shall be stored in a dry, ventilated, non attached dirt and corrosive gas room with a temperature of - 30 ℃ ~ 40 ℃.
3. Under the storage environment conditions, the storage period is 20 years (before installation on the switch)
4. If the product is not used for a long time, it must be checked regularly. If it is corroded by water vapor and harmful gas, it shall be cleaned.