Welcome Customer !

Membership

Qingxian Zeming Langxi Electronic Devices Co., Ltd.
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: Current Transformer|Voltage Regulating Transformer

Xwboo>Products

Qingxian Zeming Langxi Electronic Devices Co., Ltd.Free·1YRS

  • E-mail

    zm@zeming-e.com

  • Phone

    86-25-52601870

  • Address

    R208, Block B, Geminis Building, 30# Tulip RD, Yuhuatai Dist, 210012, Nanjing city, Jiangsu Province, China

Contact Now

ZMKD40-100PCS Series Hall Current Sensor

Model
Nature of the Manufacturer
Manufacturer
Product Category
Hall Current Sensor
Place of Origin
City, Province
Overview
Hall current sensor uses Hall effect principle to measure DC, AC, pulse and various irregular waveform currents under the condition that the original and secondary sides are completely isolated. Feature: ●Hall effect measurement principle ●Meet UL94-V0 standard
Product Details

Product parameters


Electrical   parameters

Rated current rmsIpn100A400A800A1000A1500A2000A
Measuring rangeIpm100A400A800A1000A1500A2000A
Rated output @IpVo2.5±(2*Ip/Ipn)V
    @Ip=0
2.5V
Load ResistanceRL>2KΩ
Supply VoltageUc+12V
Current consumptionIc≤15mA
Insulation voltageVd3kVAC/50Hz/1min
Dynamic parameter
Precision(@Ipn,Ta=25℃)XG<±1.0%
Linearity(@Ta=25℃)Er<±1.0%FS
Zero   offset voltage(@Ta=25℃,Ip=0)VOE<±10mV
Magnetic offset   voltage(Ipn->0)VOH<±20mV
Zero temperature driftTCVOE<±1.0mV/℃
Response timeTr<5us
Accurately followeddi/dt>100A/us
Frequency bandwidth(@-3dB)BWDC~20kHz
General parameters
Ambient operating   temperature    Ta-40~+85℃
Ambient storage temperatureTs-55~+125℃
Weightm300g
Case material
PBT G30/G15 UL94-V0
Executive standard
EN50178:1998

IEC60950-1:2001

SJ20790-2000


Advantage

●Easy to install

●Low power consumption

●Wide measuring range

●High precision and good linearity

●Lower temperature drift

●Strong anti-interference ability

●Strong overload capability

Application

●AC frequency conversion speed control device

●DC motor driven static converter

●UPS uninterruptible power supply

●SMPS Switched   Mode  Power Supplies

●Electric welder machine 

●Grid monitoring

●Industrial grade

Structure & Instructions

OC6N`KOUUA{JELU_[VCEQHPQJB}J%W1RO)]_M71)$E}LF


1. The direction of the current should be the same as the direction of the arrow of the casing;

2、Please refer to the wiring definition on the physical shell, the wrong wiring willDamaged module;

3、In order to obtain better dynamic characteristics and sensitivity, it is recommended to use a single turn wire and the wire fills the module through the wire hole best;

4、The primary side wire temperature should not exceed 100 °C;

5、 The above parameters are standard specifications, and the products can be customized according to customer needs.

Similar Product Recommend