Welcome Customer !

Membership

Qingxian Zeming Langxi Electronic Devices Co., Ltd.
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: Current Transformer|Voltage Regulating Transformer

Xwboo>Products

Qingxian Zeming Langxi Electronic Devices Co., Ltd.Free·1YRS

  • E-mail

    zm@zeming-e.com

  • Phone

    86-25-52601870

  • Address

    R208, Block B, Geminis Building, 30# Tulip RD, Yuhuatai Dist, 210012, Nanjing city, Jiangsu Province, China

Contact Now

φ4mm PCB mounting current transformer 1000:1

Model
Nature of the Manufacturer
Manufacturer
Product Category
Mini Precision Current Transformer
Place of Origin
City, Province
Overview
ZEMCT133 Current transformer Small size, high accuracy, good consistency, For current and power measurement Application and Features 1. Applications would include current , power,and energy monitoring devices 2. current measurement 3. precision power meter 4. Low cost, small size, high accuracy, PCB mounting pattern 5. fully ROHS compliant , CE approved
Product Details

Structural parameter

ZEMCT133 Current transformer

Small size, high accuracy, good consistency, For current and power measurement

 

Structural parameter:

         图片1

                                  Front view                                  Bottom view

 

Tolerance: ±0.2mm, Pin Length : 4~5mm


The main technical parameters

Model

ZEMCT133

Rated input current

5A

Rated output current

5mA

Turns ratio

1000:1

Phase angle error

≤30’(input 5A, sampling resistor 50Ω)

linear range

0~7A(sampling resistor 50Ω, room temperature 25℃)

linearity

≤0.5%(5%dot~120%dot)

Permissible error

-0.5%≤f≤+0.5% (input 5A, sampling resistor 50Ω)

Isolation voltage

4500V

Application

Current and power measurement

Encapsulation

Epoxy

Installation

PCB Mounting

Operating temperature

-40℃~+85℃


Direction for use

ZEMCT133-

                                                                             Figure I                           Figure II

1. The typical use of the product for the active output (Figure 1). R is the sampling resistor

2. The product can be directly through the resistance sampling, easy to use (Figure 2).

3. The instructions are for reference only, the specific parameters should be subject to the approval specification.