-
E-mail
TIN@INTELL-DC.COM
- Phone
-
Address
A-1401-1, NEW CENTURY MANSION, SHANGJIANG RD., WENZHOU, CHINA
Membership
Help
DC INTELLIGENT TEC.Free·1YRS
TIN@INTELL-DC.COM
A-1401-1, NEW CENTURY MANSION, SHANGJIANG RD., WENZHOU, CHINA
| Serial | name | brand | origin |
| 1 | compressor | Danfoss | The Danish |
| 2 | Electrical components | SCHNEIDER | France |
| 3 | pump | YL | Taiwan |
| 4 | evaporator | DANNICE | shenzhen |
| 5 | condenser | DANNICE | shenzhen |
| 7 | Pressure controller | FENGSHEN | Taiwan |
| 9 | Oil type pressure gauge | HONGSEN | Taiwan |
| 11 | temperature controller | Bangpu | Taiwan |
| 12 | Expansion valve | EMERSON/ALOO | The United States |
| 13 | Hand valve | FUGUO | Taiwan |
| Input voltage and frequency | AC 380V ,50Hz ,3-phase (or to buyer’s inquire, like AC440v) |
| Output voltage | 15kv |
| Output power | 6KW |
| Operating frequency | 15~40KHz |
| Humidity condition | -10℃--+40℃ |
| The efficiency | >95% |
| It adopts the imported driver circuit and use the Siemens module as the IGBT in the main loop. | |
| It locks the operating frequency automatically. It has the function of soft-start, which can reduce the pollution to the net. | |
| It has kinds of protection such as phase absence, phase error, over voltage and short circuit protection. | |
| Short circuit electronic protection on inverter power modules | |
| Electronic protection against any short circuits at the high voltage output. | |
| Push Button Front Panel Controls (the operating time is longer than digital display)of Treatment Power. | |
| Panel is compact and light weight | |
| Zero speed / Short Ckt. Trip with Audio/ Visual Alarm | |
| The model of the electrode rack | Totally enclosed type |
| The line speed | 30-35m/min for blown film line |
| The material of the roll | AL. |
| The film width | 1500mm |
| The corona roll width | 1600mm |
| The diameter of corona treater | 80mm |
| Materials to be treated | PE |
| No. of treating side | 2 |
| Film type | PE for blown film line |
| Treatment level requested | At least 38-40dyne on film |
| The model of the blade electrode | aluminium alloy |
| The protections of stop-running and rack-opening prevent the roller from burning | |
| The electrode rack can be opened through a pneumatic system to facilitate the threading up of the film when starting with the production. | |
| All of the rolls have already treated with dynamic and static balance. | |
| Gap regulation system, once the electrode has been aligned, there is the possibility to set the right gap. | |
| Film recycling machine |
| Crush motor: 1.5 [HP] |
| Turning diameter: 130mm |
| Length of knife[mm]: 123 |
| Knife material : Tungsten steel |
| Fixed qty of knifes[PC/set]: 2 |
| Qty of turning knife[PC/set]: 3 |
| Mesh size[mm]: 3-5 |
| Windmill motor: 2[HP] |
| Screw motor: 1/2HP |
| Cyclone separator[mm]: 300 |
| Working capacity[kg/hr]: 15-30 |
| Packing size L*W*H(M): 1.1*0.9*0.8M |
| Weight [KGS]: 180KGS |
| Hopper type conveying screw |
| U | the power :three phase ,four wire | 380V(-5%,+5%),50Hz |
| (2) | The total power | About155KW |
| (3). | The recycle cooling water,temperature: ≤20℃, | About 60㎥ ≥0.3Mpa |
| (4.) | Air compressor: | >0.5Mpa |
| (5.) | place | In factory without surround wind |
| (6.) | The temperature of factory | 0-35℃ |





