Welcome Customer !

Membership

Shenzhen Kelvin Electronics Co., Ltd.
Free Member ·1YRS
ShenZhen,GuangDong
Manufacturer

Main Products: Remote Control Switch|Wireless Remote Control Bomb Jamming Equipment

Xwboo>Products

Shenzhen Kelvin Electronics Co., Ltd.Free·1YRS

  • E-mail

    info@cnkelvin.com

  • Phone

    86-755-89673076

  • Address

    Floor 4, Block 23, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District,Shenzhen,China

Contact Now

Remote Controller for Electronic Lock

Model
KL-DDS04
Nature of the Manufacturer
Manufacturer
Product Category
Electronic Lock & Controllers
Place of Origin
City, Province
Overview
Remote Controller for Electronic Lock
Product Details
Description 

KL-DDS04 is a remote controller for compatible electric lock. It is used to switch on the lock by a remote control. The operation distance is up to 150 meters(1). This device is widely used in storage cabinet, showcase, bookcase, locker and so on.

Tech data

Product NameRemote Controller for Electric Lock
InputDC12V
OutputDC12V
Standby Current5mA
Frequency433.92MHz
Sensitivity-105dBm
SMax Load1.2A
Channels2
Dimension94*45*28mm (include enclosure)

Packing List

  • Remote Controller(KL-DDS04) *1pc
  • Remote Control (KL300-2) *1pc (with built-in battery)
  • DC adapter (DC12V 1A) *1pc
  • Cables for lock connection *2 pairs (Pre-installed)

Diagram

Operation

1.Program: Press and hold the learning button till the LED blinks, then release. Press any button of remote control, LED OFF. (If you press remote control now, the controller will short beep.)

2.Clear memory: Press and hold the learning button until LED from ON to OFF, then release. All stored remote controls’ ID will be cleared.

3.Installation: Connect the compatible E-lock(s) to Output 1 or/and Output 2. Then plug in the power adapter.

Using: Press button A on the remote control, the controller short beeps, and the lock will unlock. The same as button B.

Attention

Please don’t press button A and B at same time, otherwise, it may damage the receiver.

(1): The operation distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly depending on the installation and operating environment.

Similar Product Recommend