The networking tools is for RJ45 plug crimping, cutting and stripping. The tool is made of AL-ZN and Steel with ratchet.The tools is portable and easy operation
Product Details
P/N: HT-L2182R
Cutting modular cabel, cutter is on teh rear side of the tool
1a: For flat cable, cut and strip alwasy in one operation
1b: For round cable, turn the tool to its rear side, so that the single bladed cutter is facing you. Insert the round cable into the upper round hole, and squeeze the handles
Stripping modular cable, stripper is on the front side of the tool
2a: Insert the flat cable into the stripper and let it extend a little past the lower cut blade. Squeeze the handles, cable must be kept perpendicular and then pull from the tool
2b: Insert the round cable into the round stripping hole on the front side, squeeze the handles, and then turn the cable in counter clockwise direction and the tool in clockwise direction at the same time
Remove the outer jacket, insert the stripper cable into the plug and be sure both side of the cable matches well
Crimping modular plug
Place the modular plug with cable into the tool's holde. Be sure the stripper wire is between the tab and gold contacts. Squeeze the handles until it stops. Remove the crimped plug from the tool
Ratchet Released
During the crimping process, you may turn the screw on the ratchet in counter clockwise direction to stop the incorrect operation