Welcome Customer !

Membership

Shanghai Bolaxin Intelligent Control System Engineering Co., Ltd.
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: Flowmeter|Gate Valve|Blind Valve|Ball Valve|Butterfly Valve

Xwboo>Products

Shanghai Bolaxin Intelligent Control System Engineering Co., Ltd.Free·1YRS

  • E-mail

    sales@bolaixin.com.cn

  • Phone

    86-21-65985386-8029, 86-4000322168

  • Address

    Roon 5006, Building D Petroleum Mansion, No. 1515 Zhongshan 2nd North Rd, Hongkou District, Shanghai, China

Contact Now

Orifice Plate

Model
Nature of the Manufacturer
Manufacturer
Product Category
Orifice Plate
Place of Origin
City, Province
Overview
Standard throttling parts are standard orifice plates, non-standard throttling parts are eccentric orifice plate, round orifice plate, ring orifice plate, double orifice plate, quarter round orifice plate.
Product Details

Features


Simple structure, firm, convenient installation, stable and reliable performance
Accurate measurement, no need for real flow calibration
Large pressure loss requires a long straight pipe section
Cooperate with intelligent differential pressure transmitter to realize temperature and pressure compensation, 4-20mA signal output
Suitable for clean, particle-free liquid, gas and steam



Product Parameters


SizeDN50-DN1000
Pressure rating≤40Mpa
ConnectionFlange, welding and others
Tapping typeFlange tapping, Corner tapping, D and D/2 tapping
Uncertainty of outflow coefficient σc/Cσc/C=(0.7-β)%  (0.1≤β<0.2)
σc/C=0.5%         (0.2≤β≤0.6)
σc/C= (1.667β-0.5)% (0.6<β≤0.75)
Flange tappinga pressure-taking port on the flange at a distance of 25.4mm between the downstream end face of the orifice plate. The flange tapping standard orifice plate assembly is mainly used in the flow measurement and flow control of the petroleum, chemical and other industrial systems
Corner tappingThe tapping ports of the standard orifice plate for corner joint tapping pressure are divided into two types: separate drilling and annular gap tapping ports. The tapping port can be located on the clamping ring, pipe or pipe flange.
D and D/2 tappingThe diameter-pitch pressure standard orifice plate pressure port is D-D/2 (D is the pipe inner diameter), the upstream pressure port is 1D from the end face of the orifice, and the downstream pressure port is D/2 from the orifice end face


Similar Product Recommend