Welcome Customer !

Membership

SHANGHAI CLIRIK MACHINERY CO., LTD
Free Member ·1YRS
,
Other

Main Products: 磨粉设备

Xwboo>Products

SHANGHAI CLIRIK MACHINERY CO., LTDFree·1YRS

  • E-mail

    sales@clirik.com

  • Phone

    0086-021-20236178

  • Address

    9, Fuqing Rd, Pudong New Area, Shanghai, China. Scan for more information! SEN

Contact Now

European Version Coarse Hammer Crusher

Model
Nature of the Manufacturer
Other
Product Category
Stone Crushing Machine
Place of Origin
City, Province
Overview
European Version Coarse Hammer Crusher
Product Details

Overview

Brief Introduction of European Version Coarse Hammer Crusher:

European version Hammer crusher is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into fine and micro fine powders, is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.

European Version Coarse Hammer Crusher

Working Principle of European Version Coarse Hammer Crusher:

European version coarse hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers.

Working Principle of European Version Coarse Hammer Crusher

Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.

Benefit

● High capacity and low power consumption;

● Uniform particle size with high crushing and crushing ratio;

● Simple structure;

● Easy operation; low investment.

Specifications

TypePC4008-75PC40012-90PC40015-132
Rotor Diameter (mm)7509001150
Rotor Width(mm)80012001500
Rotor Speed r/min800-1000800-1000550-800
Feed head size(mm)320*930400*1200500*1500
Max Feeding Size (mm)≤50≤60≤90
Finished Size(mm)≤3≤3≤3
Capacity (T/H)10-3030-6050-100
Power (KW)55-7575-90110-132
Hammer Number183232
L*W*H/mm Layout Size2310*1665*16102840*2100*20203720*2650*2540

Note: This specification is just referencing, any changes are subject to the products.

Similar Product Recommend