-
E-mail
manager05@1sagain.com
- Phone
- Address
Membership
Help
Qingdao Flow Group LimitedFree·1YRS
manager05@1sagain.com
| PARAMETERS |
Series | 555 |
Cone Part Number | 555-S |
Cup Part Number | 552-B |
Design Units | Imperial |
Bearing Weight | 4.9 lb2.2 Kg |
Cage Type | Stamped Steel |
d - Bore | 2.2500 in57.150 mm |
D - Cup Outer Diameter | 4.8750 in123.825 mm |
D1 - Flange Outer Diameter | 5.1210 in130.073 mm |
B - Cone Width | 1.4440 in36.678 mm |
C - Cup Width | 1.1875 in30.163 mm |
C1 - Cup Flange Width | 0.2500 in6.350 mm |
T1 - Bearing Width | 1.5000 in38.100 mm |
T - Bearing Width to Flange | 0.5625 in14.288 mm |
| R - Cone Backface "To Clear" Radius1 | 0.14 in3.600 mm |
| r - Cup Backface "To Clear" Radius2 | 0.130 in3.30 mm |
da - Cone Frontface Backing Diameter | 2.76 in70.10 mm |
db - Cone Backface Backing Diameter | 2.99 in75.90 mm |
Da - Cup Frontface Backing Diameter | 4.60 in116.84 mm |
Ab - Cage-Cone Frontface Clearance | 0.08 in2 mm |
Aa - Cage-Cone Backface Clearance | 0.07 in1.8 mm |
| a - Effective Center Location3 | -0.37 in-9.4 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 13200 lbf58600 N |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 50800 lbf226000 N |
C0 - Static Radial Rating | 55700 lbf248000 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 7810 lbf34700 N |
| K - Factor7 | 1.69 |
| e - ISO Factor8 | 0.35 |
| Y - ISO Factor9 | 1.73 |
| G1 - Heat Generation Factor (Roller-Raceway)10 | 91 |
G2 - Heat Generation Factor (Rib-Roller End) | 21.1 |
| Cg - Geometry Factor11 | 0.111 |
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
E has different special properties with other inner rings or outer rings marked with the same basic parts code, not interchangeable inner rings or outer rings.
There is a stop ring on the outer diameter of RB
| PRODUCT ANALYSIS |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRODUCT SHOWING |

| PRODUCT MODELS |
| Model | Dimensions(mm) | Weight(kg) | ||
| d | D | T | ||
| 30202 | 15 | 35 | 11.75 | 0.053 |
| 30203 | 17 | 40 | 13.25 | 0.079 |
| 30204 | 20 | 47 | 15.25 | 0.127 |
| 30205 | 25 | 52 | 16.25 | 0.157 |
| 30206 | 30 | 62 | 17.25 | 0.238 |
| 30207 | 35 | 72 | 18.25 | 0.34 |
| 30208 | 40 | 80 | 19.75 | 0.438 |
| 30209 | 45 | 85 | 20.75 | 0.488 |
| 30210 | 50 | 90 | 21.75 | 0.558 |
| 30211 | 55 | 100 | 22.75 | 0.736 |
| 30212 | 60 | 110 | 23.75 | 0.93 |
| 30213 | 65 | 120 | 24.75 | 1.18 |
| 30214 | 70 | 125 | 26.25 | 1.3 |
| 30215 | 75 | 130 | 27.25 | 1.43 |
| 30216 | 80 | 140 | 28.25 | 1.69 |
| 30217 | 85 | 150 | 30.5 | 2.12 |
| 30218 | 90 | 160 | 32.5 | 2.6 |
| 30219 | 95 | 170 | 34.5 | 3.13 |
| 30220 | 100 | 180 | 37 | 3.78 |
| 30221 | 105 | 190 | 39 | 4.52 |
| 30222 | 110 | 200 | 41 | 5.28 |
| 30224 | 120 | 215 | 43.5 | 6.28 |
| 30226 | 130 | 230 | 43.75 | 6.83 |
| 30302 | 15 | 42 | 14.25 | 0.098 |
| 30303 | 17 | 47 | 15.25 | 0.134 |
| 30304 | 20 | 52 | 16.25 | 0.172 |
| 30305 | 25 | 62 | 18.25 | 0.27 |
| 30306 | 30 | 72 | 20.75 | 0.403 |
| 30307 | 35 | 80 | 22.75 | 0.538 |
| 30308 | 40 | 90 | 25.25 | 0.758 |
| 30309 | 45 | 100 | 27.25 | 1.01 |
| 30310 | 50 | 110 | 29.25 | 1.28 |
| 30311 | 55 | 120 | 31.5 | 1.63 |
| 30312 | 60 | 130 | 33.5 | 2.03 |
| 30313 | 65 | 140 | 36 | 2.51 |
| 30314 | 70 | 150 | 38 | 3.03 |
| 30315 | 75 | 160 | 40 | 3.63 |
| 30316 | 80 | 170 | 42.5 | 4.27 |
| 30317 | 85 | 180 | 44.5 | 5.08 |
| 30318 | 90 | 190 | 46.5 | 5.67 |