-
E-mail
manager05@1sagain.com
- Phone
- Address
Membership
Help
Qingdao Flow Group LimitedFree·1YRS
manager05@1sagain.com
PARAMETERS |
Series | 30207 |
Cup Part Number | Y30207 |
Design Units | METRIC |
D - Cup Outer Diameter | 72.000 mm2.8346 in |
C - Cup Width | 15.000 mm0.5906 in |
| r - Cup Backface "To Clear" Radius1 | 1.52 mm0.06 in |
Da - Cup Frontface Backing Diameter | 67.10 mm2.68 in |
Db - Cup Backface Backing Diameter | 64.01 mm2.52 in |
| C90 - Dynamic Radial Rating (90 million revolutions)2 | 15700 N3530 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)3 | 60600 N13600 lbf |
C0 - Static Radial Rating | 63600 N14300 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)4 | 10100 N2270 lbf |
| K - Factor5 | 1.56 |
| e - ISO Factor6 | 0.37 |
| Y - ISO Factor7 | 1.6 |
G1 - Heat Generation Factor (Roller-Raceway) | 18 |
G2 - Heat Generation Factor (Rib-Roller End) | 13.3 |
Cg - Geometry Factor | 0.0662 |
TIMKEN tapered roller bearing
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
E has different special properties with other inner rings or outer rings marked with the same basic parts code, not interchangeable inner rings or outer rings.
There is a stop ring on the outer diameter of RB
| PRODUCT ANALYSIS |

| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRODUCT SHOWING |


| PRODUCT MODELS |
| Model | Dimensions(mm) | Weight(kg) | ||
| d | D | T | ||
| 30202 | 15 | 35 | 11.75 | 0.053 |
| 30203 | 17 | 40 | 13.25 | 0.079 |
| 30204 | 20 | 47 | 15.25 | 0.127 |
| 30205 | 25 | 52 | 16.25 | 0.157 |
| 30206 | 30 | 62 | 17.25 | 0.238 |
| 30207 | 35 | 72 | 18.25 | 0.34 |
| 30208 | 40 | 80 | 19.75 | 0.438 |
| 30209 | 45 | 85 | 20.75 | 0.488 |
| 30210 | 50 | 90 | 21.75 | 0.558 |
| 30211 | 55 | 100 | 22.75 | 0.736 |
| 30212 | 60 | 110 | 23.75 | 0.93 |
| 30213 | 65 | 120 | 24.75 | 1.18 |
| 30214 | 70 | 125 | 26.25 | 1.3 |
| 30215 | 75 | 130 | 27.25 | 1.43 |
| 30216 | 80 | 140 | 28.25 | 1.69 |
| 30217 | 85 | 150 | 30.5 | 2.12 |
| 30218 | 90 | 160 | 32.5 | 2.6 |
| 30219 | 95 | 170 | 34.5 | 3.13 |
| 30220 | 100 | 180 | 37 | 3.78 |
| 30221 | 105 | 190 | 39 | 4.52 |
| 30222 | 110 | 200 | 41 | 5.28 |
| 30224 | 120 | 215 | 43.5 | 6.28 |
| 30226 | 130 | 230 | 43.75 | 6.83 |
| 30302 | 15 | 42 | 14.25 | 0.098 |
| 30303 | 17 | 47 | 15.25 | 0.134 |
| 30304 | 20 | 52 | 16.25 | 0.172 |
| 30305 | 25 | 62 | 18.25 | 0.27 |
| 30306 | 30 | 72 | 20.75 | 0.403 |
| 30307 | 35 | 80 | 22.75 | 0.538 |
| 30308 | 40 | 90 | 25.25 | 0.758 |
| 30309 | 45 | 100 | 27.25 | 1.01 |
| 30310 | 50 | 110 | 29.25 | 1.28 |
| 30311 | 55 | 120 | 31.5 | 1.63 |
| 30312 | 60 | 130 | 33.5 | 2.03 |
| 30313 | 65 | 140 | 36 | 2.51 |
| 30314 | 70 | 150 | 38 | 3.03 |
| 30315 | 75 | 160 | 40 | 3.63 |
| 30316 | 80 | 170 | 42.5 | 4.27 |
| 30317 | 85 | 180 | 44.5 | 5.08 |
| 30318 | 90 | 190 | 46.5 | 5.67 |