500mlPPL hydrothermal reactor
Parameters of a PPL reactor for hydrothermal reaction:
Specifications: 25ml, 50ml, 100ml, 150ml, 200ml, 500ml are available,
(special requirements can be customized)
Pressure: -0.1~3MPa (special requirements can be customized)
Temperature: -200 ~ +300 DEG C (special requirements can be customized)
Heating and cooling rate is not higher than 5 DEG /min
Material: (1) coat quality 304 stainless steel coat, other requirements can be customized
(2) lined with poly (PPL), resistant to strong acid, alkali and other organic solvents
Advantages of PPL reactor for counter flow reactor:
1., high temperature: safe use temperature -200 ~ +260 degrees centigrade;
3., good corrosion resistance, no harmful substances overflow, prevent pollution, ensure the safety of the experiment.
4. after heating and boosting, the samples which are difficult to dissolve under conventional conditions and samples containing volatile elements can be rapidly and nondestructively dissolved.
5., beautiful appearance, reasonable structure, simple operation, shorten the analysis time, reliable data.
There are 6. PPL digital polystyrene bushing, generation of care, resistant to acid and alkali etc..
7. can be used as a substitute for platinum crucible to solve the problem of sample treatment in the analysis of trace elements in high-purity alumina.
Ga, Rb, Hg and other heavy metals determination, also can be used as a high-temperature, high-pressure, anti-corrosion, high-purity reaction container, as well as organic synthesis, hydrothermal synthesis, crystal growth, or sample digestion, extraction and so on.
Shanghai Tong Tong Science and technology experimental instrument 25ml (PPL) counter polystyrene hot water reactor advantages:
1., high temperature: safe use temperature -200 ~ +300 degrees centigrade;
3., good corrosion resistance, no harmful substances overflow, prevent pollution, ensure the safety of the experiment.
4. after heating and boosting, the samples which are difficult to dissolve under conventional conditions and samples containing volatile elements can be rapidly and nondestructively dissolved.
5., beautiful appearance, reasonable structure, simple operation, shorten the analysis time, reliable data.
There are 6. PPL digital polystyrene bushing, generation of care, resistant to acid and alkali etc..
7. can be used as a substitute for platinum crucible to solve the problem of sample treatment in the analysis of trace elements in high-purity alumina.
Introduction of 25ml (PPL) counter reactor for polyphenyl hydrothermal reaction in Shanghai experimental instrument
Hydrothermal reactor is a kind of airtight container for decomposing insoluble substances. It is also called digestion tank, digestion tank, high pressure digestion tank, water heater and pressure dissolving bomb. It can be used in the pretreatment of atomic absorption spectrometry and plasma emission analysis. It can also be used in small dosage synthesis reaction;
The utility model can also use the strong acid or strong alkali in the tank body and the environment of high temperature and high pressure to achieve the purpose of quick digestion of insoluble substances. Pretreatment of samples by chemical analysis methods such as gas phase, liquid phase, plasma spectrum mass spectrometry (ICP - MS), atomic absorption and atomic fluorescence spectrometry.
The hydrothermal reactor is a right-hand assistant for digesting trace elements and trace elements. It can be used in the determination of heavy metals such as Pb, Cu, Zn, Fe, Ga, Rb, Hg and so on,
It can also be used as a high temperature, high pressure, corrosion resistant, high-purity reaction vessel, as well as organic synthesis, hydrothermal synthesis, crystal growth, or sample digestion and extraction.
Operation method of water heating reactor for Shanghai Tong Tong Science and technology:
1. The reaction material is placed in the kettle to ensure that the feed coefficient is less than 0.8, leaving a certain reaction allowance. If the reaction material is corrosive, it should be placed in the PPL lining, in order to ensure that the body is not corrosion.
2, to ensure that the pot body gasket position is correct (raised face down), and then put in PTFE or PPL bushing and upper gasket, first tighten the kettle cover, and then use steel bar to cover the lid screw twist.
3. Heat the water reactor in the heater and heat up to the required reaction temperature (less than the safe use temperature) according to the prescribed heating rate. When the reaction is finished, it should be operated in strict accordance with the prescribed cooling rate to ensure the service life of the safety and reaction kettle. When the temperature of the abdominal cavity is lower than the boiling point of the solvent, the kettle lid can be opened for further operation.
4. To confirm that the temperature in the lower abdominal cavity is lower than the boiling point of the solvent, the steel rod is first screwed and loosened by the steel bar, and then the kettle cover is opened.
5, hydrothermal synthesis reactor, after each use, should be promptly cleaned, so as not to rust. Kettle body, kettle cover line sealing place should pay special attention to clean, and prevent it from damage.