Welcome Customer !

Membership

Shanghai HuoTong Experimental Instrument Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 反应釜

Xwboo>Products

Dip Coater

Model
HTDC-300
Nature of the Manufacturer
Other
Product Category
Dip Coater
Place of Origin
City, Province
Overview
DipCoaterproductdetailsBriefintroductionofHTDC-300dippingcoatingmachineHTDC-300dipcoatingmachineisahighprecisioninstrumentfordipcoatingmethodofsol-gelprocess(Sol--Gelprocess,SG)
Product Details

Dip Coater

product details

Brief introduction of HTDC-300 dipping coating machine


HTDC-300 dip coating machine is a high precision instrument for dip coating method of sol-gel process (Sol--Gel process, SG). The core components are imported parts, precise control of the pulling speed, repeated coating, no position deviation. The pulling speed, the height of the dip, the time of impregnation, the number of coating cycles, the rate of descent and the residence time can be accurately controlled by the program. Suitable for glass, Si (100), Si (111), sapphire (Al2O3), and other commonly used resin substrate ceramic substrate.

Brief introduction of dipping dipping method


Dip coating method is the substrate clean immersion pre prepared sol, and then at a uniform speed precise control of the substrate will be smoothly pulled out from the solution, the viscosity and gravity of the substrate surface to form a layer of uniform film, followed by solvent evaporation and rapid, adhesion formed on a substrate the surface of the sol gel layer of gel film quickly. The schematic diagram is as follows:

Many factors affect the film thickness, including viscosity, density, specific gravity, pulling speed and angle of dip solution, solvent viscosity, density, evaporation rate and environmental temperature and drying conditions.

Schematic diagram of HTDC-300 dip coating machine:


Product features of HTDC-300 dip coating machine:


- adopts imported linear guide rail and servo motor control, uniform pulling speed precision.

- stable operation and no jitter, no vibration level. Ensure the stability of the equipment and the uniformity of film forming.

The Huo Tong - independent research and development of instrument control system, pulling speed, lifting height, dipping time, coating times, circulation rate of decline, the residence time can be controlled by adjusting program

In the high-end brand touch screen, clear interface, easy to operate

- special fixture design, holding more securely

In the spray treatment, exquisite appearance

Product parameter of HTDC-300 dip coating machine:


1 、 lifting stroke: 0 ~ 300mm

2 、 lifting speed range: 1~9999 m/s, minimum resolution 1 m/s

3, position accuracy: <0.01mm

4, speed accuracy: + 0.01%

5, dipping time: 1 ~ 3600s

6, coating frequency: 1~1000 times

7, coating interval time: 1 ~ 3600s

8, power: AC, 220V, 50Hz


Similar Product Recommend