24kV 200A Single-pass casing joints threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing inserts and elbow connectors comprise the essential components...
Product Details
Anhuang mainly produce 10KV to 35KV cable accessories, load break Elbow separable connectors, T shaped screened separable connector, bushing insert, bushing well. Anhuang Electric Power obtained international quality management system certification for ISO9001 Certificate.
200A 15kV & 25kV series high voltage bushing insert threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing inserts and elbow connectors comprise the essential components of all load break connections.
24kV 200A Single-pass casing joints threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing inserts and elbow connectors comprise the essential components of all load break connections. The bushing Insert uses a patented wholly current path, containing only one current transfer point, within the insert itself. The uncomplicated nature of the current path design delivers superior, reliable performance.
An internal broach allows for positive torque controlled installation. Using the optional installation torque tool the bushing insert can be properly tightened into the bushing well without the fear of accidentally breaking the bushing well stud. Power exclusive latch indicator ring, located on the circle inference of the bushing’s collar, eliminates the guesswork of load break elbow installation of the bushing insert.
The bright yellow ring provides immediate feedback to determine if the elbow is properly installed on the insert.
The Single-pass casing joints are molded using high quality sulfur-cured insulation and semi-conduction EPDM rubber. When mated with a comparably rated component, the bushing insert provides a fully shielded and submersible connection for load break operation.
Description
Reference No.
operating voltage
operating nominal current
200A 24kV Bushing lnsert
AH DTT-24/200
24kV
200A
Product Group
1. Load Break Screened Separable Connector
Anhuang 200A series load break screened separable plug in elbow connector is a fully-shielded and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformers, cable branch box equipped with load break bushings.
2. Elbow Surge Arrester
Elbow surge arresters are used on underground systems in pad-mounted transformer and entry cabinets, vaults, switching enclosures and other installations to provide shielded deadfront arrester protection. They are designed for use with 200 A loadbreak interfaces that conform to IEEE 386 standard to protect equipment and extend cable life.
3.Load Break Junctions
Load break junctions are used in pad-mounted apparatus, underground vaults, and other apparatus to sectionalize, establish loops, taps, or splices, and to facilitate apparatus changeouts. Sectionalizing a cable run to find and isolate a cable fault is made easy when a loadbreak junction is used with 15 kV Class loadbreak elbows.
4.Insulated Protective Cap
200A 15kV & 25kV insulated protective cap as a touch proof terminations is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the insulated protective cap provides a fully shielded, submersible insulating cover for energized bushings.
5.Dead Break T Shaped Screened Separable Connector
15/24kV 600A Class T dead break connector is used to terminate high voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible. Anhuang provides an exclusive optional capacitive test point similar to test points on 200A elbow connectors.
6.600A/200A Reducing Tap Plug
This integral dead break bushing is used to convert a standard 600A dead break interface to a standard 200A load break interface. Used with a 200A insulated protective cap, M.O.V elbow arrester, grounding elbow or load break elbow connector. A integral dead break bushing provides a fully shielded.
7.15kV & 25kV 200A High Voltage Bushing Well
This bushing well mates interface conforms to ANSI/IEEE Standard 386 for Separable Insulated Connectors and accept bushing well inserts complying with the Standard. The casing seat is molded using high quality insulating material, when mated with comparably rated products, it provides a fully shielded insulating connection.
Why Do You Prefer Anhuang?
1.Being from Anhuang is to believe in the quality and the details. Anhuang has strong engineering capability, with its young and energetic upper management using the most advanced technologies for the production.
2. The team for foreign trade have 13 years’ experience. From inquiry to shipment, we provide the most suitable scheme for our customers to meet their requirements.