Welcome Customer !

Membership

ANHUANG ELECTRIC POWER TECHNOLOGY CO., LTD.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: Other Connectors|Surge Protector|Current Transformer

Xwboo>Products

ANHUANG ELECTRIC POWER TECHNOLOGY CO., LTD.Free·1YRS

  • E-mail

    admin@anhelec.com

  • Phone

    86-577-61758739

  • Address

    No. 281,wei 11th road,Yueqing Economic Development Zone,Wenzhou,Zhejiang,China.

Contact Now

15KV 200A PT Elbow Surge Arresters

Model
Nature of the Manufacturer
Manufacturer
Product Category
Power Cable Accessories
Place of Origin
City, Province
Overview
Elbow Connector is a fully-shielded and insulted plug-in termination for connection underground cable to distribution power system of pad-mound tra­nsformer, surrounding power supply branch box, cable branch box equipped with load break bushings. The elbow connector and bushing insert comprise...
Product Details

image

Anhuang mainly produce 10KV to 35KV cable accessories, load break Elbow separable connectors, T shaped screened separable connector, bushing insert, bushing well. Anhuang  Electric Power obtained international quality management system certification for ISO9001 Certificate.


15KV 200A PT Elbow Surge Arresters are used on underground systems in pad-mounted transformer and entry cabinets, vaults, switching enclosures and other installations with screened separable connectors to provide shielded deadfront arrester protection. They are designed for use with 200 A loadbreak interfaces that conform to IEEE 386 standard to protect equipment and extend cable life.


The available conductor cross section is 35-50mm2for 15kv cable. The conductive pole W/ARC extinguishes function.


Description

Reference No.

operating voltage

operating nominal current

15/200PT Elbow joint

AH AZT-15/200A

15kV

200A

 

surge arrester

Product group


1. Load Break Screened Separable Connector

Anhuang 200A series load break screened separable plug in elbow connector is a fully-shielded and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformers, cable branch box equipped with load break bushings.

elbow connector

 

2. High Voltage Bushing Insert

200A 15kV & 25kV series bushing insert threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing inserts and elbow connectors comprise the essential components of all load break connections.

bushing-insert


3.Load Break Junctions

Load break junctions are used in pad-mounted apparatus, underground vaults, and other apparatus to sectionalize, establish loops, taps, or splices, and to facilitate apparatus changeouts. Sectionalizing a cable run to find and isolate a cable fault is made easy when a loadbreak junction is used with 15 kV Class loadbreak elbows.

15kv-200A-Loadbreak-Junctions


4.Insulated Protective Cap

200A 15kV & 25kV insulated protective cap as a touch proof terminations is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the insulated protective cap provides a fully shielded, submersible insulating cover for energized bushings.

Insulated protective cap-3

5.Dead Break T Shaped Screened Separable Connector

15/24kV 600A Class T dead break connector is used to terminate high voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible. Anhuang provides an exclusive optional capacitive test point similar to test points on 200A elbow connectors.

600A-T-deadbreak-connector 

 

6.600A/200A Reducing Tap Plug

This integral dead break bushing is used to convert a standard 600A dead break interface to a standard 200A load break interface. Used with a 200A insulated protective cap, M.O.V elbow arrester, grounding elbow or load break elbow connector. A integral dead break bushing provides a fully shielded.

600A-200A-Reducing-Tap-Plug

7.15kV & 25kV 200A High Voltage Bushing Well

This bushing well mates interface conforms to ANSI/IEEE Standard 386 for Separable Insulated Connectors and accept bushing well inserts complying with the Standard. The casing seat is molded using high quality insulating material, when mated with comparably rated products, it provides a fully shielded insulating connection.

bushing-well





Why Do You Prefer Anhuang?

 

1, Being from Anhuang is to believe in the quality and the details. Anhuang has strong engineering capability, with its young and energetic upper management using the most advanced technologies for the production.

 

2, The team for foreign trade have 13 years’ experience. From inquiry to shipment, we provide the most suitable scheme for our customers to meet their requirements.


who-we-are-1