Material Type: NBRSize: cuztomizedPlace of Origin: ChinaProduct name: o ring sealSize: OD 5.5 mm x TH 1.9 mm
Product Details
What is the difference between HNBR and NBR?
Acrylonitrile Butadiene Rubber (NBR), usually shortened to Nitrile, was developed in 1941 as the first oil resistant rubber. Grades with high acrylonitrile content have better oil resistance whereas low acrylonitrile content gives better low temperature flexibility and resilience.
· Nitrile has moderate physical properties but good abrasion resistance. Gas permeability is low.
· Ozone resistance and electrical properties are poor.
· Flame resistance is poor and it is not suitable for use with use with polar solvents (e.g. MEK).
· Certain grades can be compounded with PVC to improve ageing, flame, petrol and ozone resistance.
· Carboxylated grades of Nitrile (XNBR) have improved physical properties and higher temperature resistance.
· Potable water (WRAS) compounds are available as well as mixes suitable for use in the food and pharmaceutical industries.
· Typical applications include accumulator bladders, diaphragms, gaskets, hose, liners, O-rings and seals.
· Typical working temperature range: -25°C to +100°C. Low acrylonitrile materials good down to -50°C & peroxide cured materials up to +150°C.
· Hydrogenated Nitrile Rubber (HNBR) properties depend upon the acrylonitrile content and the degree of hydrogenation of the butadiene copolymer.
· They have rather better oil and chemical resistance than Nitrile Rubber and can withstand much higher temperatures.
· HNBR has excellent resistance to sour oil and gas, steam, hot water and ozone.
· Physical properties (e.g. tensile and tear strength, elongation, abrasion resistance, compression set, etc.) are also excellent and compounds exhibit good dynamic behaviour at elevated temperatures.
· Like EPDM, HNBR can either be cured with sulphur or peroxide, depending upon which properties are the most important.
· Components in HNBR offer an excellent range of performance at a cost between Nitrile rubber and Fluoroelastomers.
· Limitations include poor electrical properties, poor flame resistance and attack by aromatic oils and polar organic solvents.
· Typical applications include accumulator bladders, diaphragms, gaskets and seals, especially for the oil and gas industries.
· Typical working temperature range: -25°C to +175°C