FK10-1BC underground jumbo drill is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series use all hydraulic drive, with high efficiency and speed which can be 0.8-2 m/min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto-stop and anti-jamming function, auto-stop at end-point, auto-wash, working with diesel engine can improve the working environment a lot.
Configuration And Technical Parameters
Drilling Arm
Diesel engine: Cummins
Drilling arm: DF00201/2.4m
Model: B3.3-C80/60KW
Lifting hydraulic cylinder: DF631.10030
Traveling mechanism
Pitch hydraulic cylinder: DF631.8075
Travel motor: Imported
Rise and Fall: up55° down16°
Track group: Domestic
Arm swing: inner14° outer47°
Air control system
Compensative travel: 1500mm
Air pump ≥2000L/min 0.8MPa
Reverse: positive180° negative180°
Blowing hole air pressure (out-source gas) 0.7Mpa
Thruster Assembly
oil tank air pressure: 0.03Mpa
Hydraulic drill: HYD200
Drill lubrication air pressure: 0.4Mpa
Thruster: DF00333
Water control system
Rock drill tools: R32-R32-3050
Water pump ≥2000L/h ≤1.2MPa
Pitching: down105° up15°
High-pressure ball valve (YJZQ): 21MPa
Swing angle: inner45° outer45°
multi-way direction valve: Imported
Total length: 4250mm
Handle valve for traveling: Imported
Hole depth: 3100 mm
Pressure cartridge valve: Imported
Max. Propulsion: 9000 N
Main filter: High pressure pipeline filter
Impact oil pressure: 14~16 MPa
High pressure hose: Mine safety standard
Impact flux: 30~45 L/min
Colder entrance water pressure: (≤) 0.6Mpa
Torque: 60~260 N·m
Rock drill water pressure: (≥) 1.2Mpa
Impact energy: 100~200 J
Hydraulic and pipe system
Impact frequency: 34~67 Hz
Hydraulic pump: Triple vane pump
Rotate speed: 200~400 r/min
Hydraulic oil heat exchanger: 50 pieces
Impacting loop pressure: 16Mpa
Jumbo Body
Drill pipe rotation loop pressure: 15Mpa
Overall size (l×w×h): 7800×990×2260 mm
Compensation loop pressure: 10Mpa
Hole diameter: Φ32~Φ102 mm
Boom loop pressure: 20Mpa
Drill pipe length: 3450 mm
Propulsion loop pressure: 11Mpa
Hole depth: 3.1 m
Leg extension loop pressure: 21Mpa
Drilling speed: 0.8~2 m/min
Traveling loop pressure: 20Mpa
Section(b×h): 2×2~3.5×3.5 m
Large arm swing cylinder
Grade ability: 14%
pendulous device: DF00102
Total weight: ≈6500 kg
Deliver, Shipping And Serving
Related Videos:
Product Qualification
Other Underground Mining Machines We Supply
Latest News -
Although igneous rock is hard, because it is integrated, in addition, suppose small number of crevices and not weathered, it is relatively drilled, its advance is slow but few failures, generally, it can gain satisfied result, but relative fast damage of drill device will occurred.
3.4.10 Operate drill rod rotation valve, the drill rod rotates. (Counter-clockwise is for drilling operation and clockwise is for dismantle drill rod)
3.4.11 Operate rock drilling propulsion handle, drilling operation advances or retreats. Automatic bounce reset for fixing or retreat of positioning of the control valve during conducting propulsion drilling.
3.4.12 Push the handle of gradually drilling valve, first small percussion of rock drilling at low speed, after the drill rod bit enters into rock, propulsion increases, the impact valve automatically reverse direction.
3.4.13 When the drill rod bit fully enters into the rock and, determined no danger of inclination, pushes the handle of the gradually drilling vale to the end and conduct regular drilling operation.
3.4.14 When propulsion distance reach to the termination, the slide guide of the drill jumbo and percussion action will automatically stopped.
3.4.15 Pull the handle of gradually drilling valve to the original position.
3.4.16 Pull back the propulsion handle of rock drilling and let the jumbo truck retreat to the original position.
3.5 Drillability and boreability of rock
3.5.1 Drillability and boreability of rock
Drillability or rock means the drill rod relaying on rotation torque and propulsion pressure, the penetration speed the drill hole gains in the rock. boreability means the penetration speed gained by using rotation-percussion type rock drill plus propulsion pressure to penetrate blast hole. Rotation type rock drill is adopted for viscosity and toughness rocks and, rotation-percussion type drilling machine is adopted for fragile.