FK20-2BCD twin boom jumbo is mainly used to drill blast holes for tunneling constructions in mining
Main features:
(1) The jumbo has auto-stop and anti-jamming function, auto-stop at end-point, auto-wash, working with diesel engine can improve the working environment;
(2) Drill jumbo has flexible hydraulic rock drill can work on the section, roof, side and floor
(3) It can drill bolt hole conveniently with our patent impeller.
(4) This jumbo has a small body, runs with the crawler, can climbing flexibly on 14° slope.
Configuration And Technical Parameters
Item
Parameter
Body
Overall size (L×W×H)
8240×1290×2450 mm
Hole diameter
Φ33 ~Φ102 mm
Drill pipe length
3050 mm
Hole depth
2.7 m
Drilling speed
0.8~2 m/min
Section (W×H)
2.5×2.5~5.5×4.5 m
Climbing capability (smooth-riding surface)
25%
Total weight
≈8500 kg
Walking aids
Engine power
30 KW
Running speed
2.5 km/h
Min. turning radius
4.5 m
Boom
Up and down
up55°, down16°
Swing boom
inner14°, outer47°
Compensation
1500 mm
Rotation
positive180°, negative180°
Thruster
Pitching
down105°, up15°
Swing angle
inner45°, outer45°
Total length
4150 mm
Distance
2700 mm
Max. Propulsion
9000 N
Impacting oil pressure
30~45 L/min
Impacting flow
14~16 Mpa
Torque
60~260 N·m
Impacting energy
100~200 J
Impacting frequency
34~67 Hz
Hydraulic system
Impacting loop pressure
16Mpa
Drill pipe rotation loop pressure
15Mpa
Compensation loop pressure
10Mpa
Boom loop pressure
20Mpa
Propulsion loop pressure
11Mpa
Leg extension loop pressure
21Mpa
Running loop pressure
20Mpa
Air system
Drop tank air pressure
0.03 Mpa
Blowing hole air pressure
0.7 Mpa
Rock drill air pressure
0.4 Mpa
Water system
Rock drill water pressure
(≥) 1.2Mpa
Colder water pressure
(≤) 0.6Mpa
Electric system
Supply voltage
380 V
Electric motor rotation speed
1470 r/min
Main Features
Product Qualification
Other Underground Mining Machines We Supply
Latest News -
After the hydraulic circuit is formed, advance or retreat, turn or stop of the rock drill can be controlled through the control valve 4. When the rock drill stops, that is when the direction valve 4 is at the middle position,the travel hydraulic circuit cannot be formed, and therefore, the travel brake 7 lost pressure. Brake 7 is open, the spring is in a state of compression.
The pressure protection of running circuit is fulfilled by two overflow valves 5 and 6. The maximum travel pressure would not exceed the set pressure (21MPa). When the jumbo suddenly braked, because of inertia function, at this moment, contrarily, the electric motor 8 became a pump to work, the oil pressure in the chamber rapidly increase and, relative vacuum zone (create negative pressure) is formed in another chamber, the high pressure chamber overflows through overflow valve 5 or 6 (When suddenly brake during advancing, one overflow valve overflows, suddenly brake when retreating, another overflow valve overflows), oil compensate in two part of vacuum zones through check valve 9 or 10 (suddenly brake during advancing, one direction valve compensates oil, during retreating, another direction valve compensates oil ) thus the travel circuit plays the role of protection and avoid failure.
The propulsion pressure of the rock drill is adjusted by the gradually drilling valve but its retreat pressure is determined by the overflow valve 2. The highest pressure will not exceed its set pressure (17.5MPa).
2.4.5 The hydraulic circuit for travel of the rock drill
When the main pump supplies pressurized oil to the system, the operation direction valve 4 can immediately control the rotation of the travel electric motor. Only when the percussion valve 2 is at the middle position, the travel hydraulic circuit can be formed.
After the hydraulic circuit is formed, advance or retreat, turn or stop of the rock drill can be controlled through the control valve 4. When the rock drill stops, that is when the direction valve 4 is at the middle position,the travel hydraulic circuit cannot be formed, and therefore, the travel brake 7 lost pressure. Brake 7 is open, the spring is in a state of compression.
The pressure protection of running circuit is fulfilled by two overflow valves 5 and 6. The maximum travel pressure would not exceed the set pressure (21MPa). When the jumbo suddenly braked, because of inertia function, at this moment, contrarily, the electric motor 8 became a pump to work, the oil pressure in the chamber rapidly increase and, relative vacuum zone (create negative pressure) is formed in another chamber, the high pressure chamber overflows through overflow valve 5 or 6 (When suddenly brake during advancing, one overflow valve overflows, suddenly brake when retreating, another overflow valve overflows), oil compensate in two part of vacuum zones through check valve 9 or 10 (suddenly brake during advancing, one direction valve compensates oil, during retreating, another direction valve compensates oil ) thus the travel circuit plays the role of protection and avoid failure.
The pressure of the system is controlled by the gradually drilling valve.
Controlling of the percussion pressure can reach the aim of control the percussion energy. When propulsion completed, the propulsion oil circuit discharges, the sequence valve is reset under the action of spring, the small percussion oil cylinder lost pressure and is reset under the action of its spring force, and the percussion oil circuit of the rock drill is cut-off, percussi9n stops. The whole process of percussion and stopping of the rock drill are all controlled by high or low oil pressure of the propulsion system and high or low water pressure of the water supply system and it is automatic process.