Welcome Customer !

Membership

Jinan Focor Machinery Co.,Ltd
Free Member ·1YRS
JiNan,ShanDong
Manufacturer

Main Products: Loader|Truck|Hydraulic Pump

Xwboo>Products

Jinan Focor Machinery Co.,LtdFree·1YRS

  • E-mail

    sales@focormach.com

  • Phone

    86-531-88802487

  • Address

    410, Fenghuang Road, Gaoxin District, Jinan City, Shandong Province, China.

Contact Now

Tunnel Jumbo

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drilling Jumbo
Place of Origin
City, Province
Overview
Tunnel Jumbo
Product Details
Brief Introduction

Name: Tunnel jumbo

Model: FK20-2BCD

Power of Diesel engine: 60 KW

Power of Electric motor: 30 KW

Section (b×h): 2.5×2.5~5.5×4.5 m

Dimensions: 8240×1290×2450 mm

Product Introduction

Main features of FK20-2BCD Jumbo:

() Use all hydraulic drive, with high efficiency and speed which can be 0.8-2.5 m/min.

() It has advanced hydraulically controlled drilling system, which is safe and simple to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto wash.

() The flexible hydraulic rock drill can work on the section, roof, side and floor.

() The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.

Configuration And Technical Parameters

Item

Parameter

Body

Overall size (L×W×H)

8240×1290×2450 mm

Hole diameter

Φ33 ~Φ102 mm

Drill pipe length

3050 mm

Hole depth

2.7 m

Drilling speed

0.8~2 m/min

Section (W×H)

2.5×2.5~5.5×4.5 m

Climbing capability (smooth-riding surface)

25%

Total weight

≈8500 kg

Walking aids

Engine power

30 KW

Running speed

2.5 km/h

Min. turning radius

4.5 m

Boom

Up and down

up55°, down16°

Swing boom

inner14°, outer47°

Compensation

1500 mm

Rotation

positive180°, negative180°

Thruster

Pitching

down105°, up15°

Swing angle

inner45°, outer45°

Total length

4150 mm

Distance

2700 mm

Max. Propulsion

9000 N

Impacting oil pressure

30~45 L/min

Impacting flow

14~16 Mpa

Torque

60~260 N·m

Impacting energy

100~200 J

Impacting frequency

34~67 Hz

Hydraulic system

Impacting loop pressure

16Mpa

Drill pipe rotation loop pressure

15Mpa

Compensation loop pressure

10Mpa

Boom loop pressure

20Mpa

Propulsion loop pressure

11Mpa

Leg extension loop pressure

21Mpa

Running loop pressure

20Mpa

Air system

Drop tank air pressure

0.03 Mpa

Blowing hole air pressure

0.7 Mpa

Rock drill air pressure

0.4 Mpa

Water system

Rock drill water pressure

(≥) 1.2Mpa

Colder water pressure

(≤) 0.6Mpa

Electric system

Supply voltage

380 V

Electric motor rotation speed

1470 r/min

Main Features

FK20-2BCD 1040

Product Qualification

证书


Other Underground Mining Machines We Supply

image039(001)

Latest News - Hydraulic pressure rock drilling mechanism

The hydraulic rock drill mechanism mainly includes auger drill boom, boom swing oil cylinder, thruster and rock drill.

One end of the drill boom is articulated with the outer sleeve barrel of the drill boom seat (spiral swing oil cylinder) with pin spindle and, another end is articulated with the swivel mount of the swing frame of the thruster, the drill boom seat is fixed on the frame base. The thruster is composed of swing frame of the thruster 2, guide rail of the thruster 1, advance oil cylinder 4, compensating oil cylinder 3, pallet of the hydraulic rock drill 5 and steel wire roller.

Boom swing oil cylinder 7, which control the boom horizontal rotation, is hinged between the frame and the boom.

image041_1The compensation oil cylinder 3 of the thruster is set between the guide rail of the thruster and the swing frame of the thruster. Because of relative action of the piston rod in the oil cylinder, the guide rail is able to conduct reciprocating movement along the swing frame of the thruster.


Boom rotation is driven by the Rifle Swing Hydraulic Cylinder.

The hydraulic rock drill 6 is fixed at the pallet of the rock drill 5, the rock drill and its pallet, pushing by the feed cylinder and steel wire winding mechanism, conducts reciprocating movement along the guide rail of the thruster to complete drilling and drill rod retreating action. To adapt various conditions of surrounding rocks, throttle speed adjusting valve and gradually drilling valve are set on the hydraulic propulsion system of the drill jumbo and, they can regulate the drilling speed and axial pressure according to different rocks.


Composition of the propulsion system: Propulsion oil cylinder control the boom horizontal hunting around the boom holder by relative reciprocating motion.

The rising and lowering oil cylinder of the drill boom 9 is hinged between the drill boom seat (spiral swing oil cylinder) and the drill boom. The reciprocating movement of piston rod in the oil cylinder supports the rising and lowering of the drill boom. Bi‐directional hydraulic lock is set in the oil inlet route to guarantee stable operation of the drill boom after it rose. To guarantee the stability during lowering of the drill boom, throttle valve is set in oil return route. The tilt angle oil cylinder 12 of the thruster is hinged between the swivel mount of the swing frame of the thruster and the swing frame of the thruster. Because of reciprocating movement of piston rod in its oil cylinder, the thruster can swing left and right surrounding the swivel mount.


The descending and ascending oil cylinder 11 of the thruster is articulated on the rotation boom of the drill boom and the swivel mount of the swing frame of the thruster, because the piston rod is reciprocating moving in its oil cylinder, the thruster can complete its descending and ascending action.


Propulsion system is a welded slide carriage, four guides with square section, the two upper guides are the guiding when the rock drill propels, the two under guides are the guiding when promote the slide carriage compensation. A crosshead is on the front tip of the slide frame. When drill holes, the crosshead constantly against the coal face to avoid moving of hole position when drilling and cause accident.


The function of middle and front drill rod holding device is to avoid bending of the drill rod when drilling holes and strengthen the bending strength of the drill rod. The pallet of the rock drill is as the transitional plate for connecting of the rock drill and the slid plate. The pulley is used for winding the steel wire rope and organizes the pulley group system together with the pulley pallet and propulsion oil cylinder. The tensioning of steel wire rope is realized by the tensioner.


The piston rod of the propulsion oil cylinder is fixed on the sliding guide, when pressure oil enters unto the non‐piston rod chamber of the oil cylinder through the oil‐in, thrust force is produced under the function of pressure and push forward the cylinder body of the propulsion oil cylinder, at the same time, drives the rock drill pushing forward.constantly against the coal face to avoid moving of hole position when drilling and cause accident.


Similar Product Recommend