Main features of FK10-1BCDL Single Boom Diesel Drill:
(1) It is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering;
(2) This jumbo has a small body, runs with the wheels, can reach a speed of 20km/h Working with electric motor can improve the working environment, reduces noise, dust and energy consumption.
(3) The flexible hydraulic rock drill can work on the section, roof, side and floor.
(4) The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.
Configuration And Technical Parameters
Item
Parameter
Body
Overall size (L×W×H)
8300×1350×2650 mm
Hole diameter
φ33~φ102
Drill pipe length
3050 mm
Hole depth
2.7 m
Drilling speed
0.8~2 m/min
Section (W×H)
2×2~3.5×3.5 m
Climbing capability
14%
Total weight
≈7000 kg
Bottom
Min. turning radius
2500 m
Running speed
≤20 km/h
Climbing capability
8°
Joint
inner35°, outer35°
Up and down
up55°, down16°
Rotation angle
positive180°, negative180°
Pitching
down105°, up15°
Compensation
1500 mm
Thruster
Pitching
down105°, up15°
Swing angle
inner45°, outer45°
Total length
4150 mm
Hole depth
2700 mm
Max. Propulsion
9000 N
Impact oil pressure
14~16 MPa
Impact flow
30~45 L/min
Torque
60~260 N·m
Impact energy
100~200 J
Impact frequency
34~67 Hz
Rotating speed
200~400 r/min
Hydraulic system
Impacting loop pressure
16 MPa
Drill pipe rotation loop pressure
15 MPa
Compensation loop pressure
10 MPa
Boom loop pressure
20 MPa
Propulsion loop pressure
16 MPa
Leg extension loop pressure
21 MPa
Running loop pressure
20 MPa
Air system
Tank air pressure
0.03 MPa
Rock drill air pressure
0.4 MPa
Water system
Rock drill water pressure
(≥)1.2 MPa
Colder water pressure
(≤)0.6 MPa
Electric system
Installed power
42.5 KW
Supply voltage
380 V
Electric motor rotation speed
1470 r/min
Main Features
Product Qualification
Other Underground Mining Machines We Supply
Latest News - Characteristics of general structure
7.1.1 Structure characteristics of FK10-1BCDL fully hydraulic drill jumbo
a. The overall dimension is small with compact structure, multi‐ function and high efficiency. The width of the machine body is 990mm and, it can pass through 3.5m × 3.5m roadway, the largest cross section suits to the machine are 10 ㎡. This machine not only can drill holes, but also make bolt holes. It can drill blast holes in working face, roof, side wall and floor. It conveniently drill bolt holes when assembled with short thruster.
b. The machine is in modular structure. The jumbo can be disassembled into 3 parts (running chassis, power and drilling mechanism) and it is convenient to dismantle and assemble.
c. This double booms drilling machine is flexible. The boom can make 5 actions and, it can drill at any position in working face with precise compensation positioning.
d. Chassis is integrated rigid crawler belt‐tread. The rigid chassis is welded structure with good integrated performance and large stiffness and strength and, it is the base to the whole machine. The rear empty chamber is main oil tank, drill boom seat is welded at both left and right on the chassis which bears dynamic and static load of rock drilling system of the boom. Running control valves fixed in front of the driver seat can control the advance, retreat and turning of the jumbo machine. A landing leg is assembled at both left and right in front of the chassis to maintain the stability and reliability of the integrated jumbo during drilling operation. Driven by hydraulic motor, the highest running speed is 30mmin.
e. The most advanced spiral swing oil cylinder to that our institute has its intellectual property is adopted for rotation and swing of the drill boom and it can lasts long time. The thruster has travel multiple proportions structure (The travel multiple proportions structure consists of propulsion oil cylinder, pulley block, steel wire rope, sliding board of percussive rock drill and steel wire rope take‐up device). The stroke of thrusting oil cylinder is 1,550mm. The max. Depth of drill hole is 3,100mm.
f. Single power, low power consumption. Running and drilling share a triple oil pump, other actions are operated alone.
g. The hydraulic system is advance. Mid‐high pressure system is adopted and system design is reasonable and reliable. Stepwise rock drilling mechanism is adopted, slow percussion can be carried out when starting drilling, after positioned of the drill hole, stepwise pressurize to the max. Impact energy after spotting and, automatically stops when drilling completed. It can also auto stop drilling and impelling when the drill rod blocks and continue working after fault and trouble clear. High pressure of drifter is also provided to extend service life of the rock drill.
7.1.2. Working principle of the drill jumbo
When the jumbo running, oil pressure opens the multi-disc brake, the hydraulic motor drives the rotation of the sprocket through reduction gearbox. When the jumbo drilling, first, the hydraulic system operates 2 landing legs at both sides to maintain the jumbo in stable state, then operate the boom to choose hole position, position the thruster by compensating mechanism and operate rock drilling system and, the hydraulic drill works, water supply system flushing out rock cuttings from the drill hole and, finally, the air system complete clearing operation of the drill hole.