(1) It is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering;
(2) Use all hydraulic drive, with high efficiency and speed which can be 0.8-2.5 m/min.
(3) It has advanced hydraulically controlled drilling system, which is safe and simple to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto wash.
(4) This jumbo has a small body, runs with the wheels, can reach a speed of 20km/h Working with electric motor can improve the working environment, reduces noise, dust and energy consumption.
(5) The flexible hydraulic rock drill can work on the section, roof, side and floor.
(6) The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.
Configuration And Technical Parameters
Item
Parameter
Body
Overall size (L×W×H)
8300×1350×2650 mm
Hole diameter
φ33~φ102
Drill pipe length
3050 mm
Hole depth
2.7 m
Drilling speed
0.8~2 m/min
Section (W×H)
2×2~3.5×3.5 m
Climbing capability
14%
Total weight
≈7000 kg
Bottom
Min. turning radius
2500 m
Running speed
≤20 km/h
Climbing capability
8°
Joint
inner35°, outer35°
Up and down
up55°, down16°
Rotation angle
positive180°, negative180°
Pitching
down105°, up15°
Compensation
1500 mm
Thruster
Pitching
down105°, up15°
Swing angle
inner45°, outer45°
Total length
4150 mm
Hole depth
2700 mm
Max. Propulsion
9000 N
Impact oil pressure
14~16 MPa
Impact flow
30~45 L/min
Torque
60~260 N·m
Impact energy
100~200 J
Impact frequency
34~67 Hz
Rotating speed
200~400 r/min
Hydraulic system
Impacting loop pressure
16 MPa
Drill pipe rotation loop pressure
15 MPa
Compensation loop pressure
10 MPa
Boom loop pressure
20 MPa
Propulsion loop pressure
16 MPa
Leg extension loop pressure
21 MPa
Running loop pressure
20 MPa
Air system
Tank air pressure
0.03 MPa
Rock drill air pressure
0.4 MPa
Water system
Rock drill water pressure
(≥)1.2 MPa
Colder water pressure
(≤)0.6 MPa
Electric system
Installed power
42.5 KW
Supply voltage
380 V
Electric motor rotation speed
1470 r/min
Main Features
Product Qualification
Other Underground Mining Machines We Supply
Latest News -
Table 3 Characteristics of some common rocks
Type of rock
Name of rock
Specific gravity
Grain size (mm)
SiO2 content
Swell factor
Compressive strength MPa MPa=10kgcm2
Igneous
Diorite
2.65~2.85
1.5~3
1.5
170~300
Rock
2.85~3.2
>2
50
1.6
260~350
Gabbro
2.7
0.1~2
70
1.6
200~350
Intrusi
Granite
Ve rock
Extrusi
Andesite
2.7
<0.1
1.6
300~400
Ve rock
2.8
<0.1
50
1.5
250~400
Basalt
2.7
<0.1
1.5
120
2.7
<0.1
1.5
330
Rhyolite
Trachyto
Conglome
2.6
>2
1.5
140
Sedimen
Rate
2.5
0.1~1
80~95
1.5
160~255
Tary
2.7
<1
50~62
1.35
70
Rock
Sand-
2.7
1~2
2~10
1.6
150
Stone
2.6
1~2
1.55
120
1.5~2.6
1~2
1~1.6
30~100
The hardness of limestone varies between Cretaceous and Carboniferous Period and no wearing of drilling device exists. Conventional percussion hammer is able to conduct drilling in hard lime and, rotation type rock drill is mostly used in hard limestone. Sandstone has strong explosion stability, in normal condition, drilling can be conveniently conducted by using conventional percussion hammer. Characteristics of some normal stones see Table 3.
Drillability index is also drilling speed index, it is relative drillability figure given to different rocks. It can help to forecast drilling efficiency.
The drilling efficiency is determined by frangibility value S20 and J value gained by micro rock drilling test, detailed description would not be given here. Test samples for determine drilling speed index and drill head bit wearing index are taken by diamond core-drilling machine and are used for evaluation of drillability. The rock drilling speed index and rock drill bit wearing index for most type of rocks are related each other, when the rock drilling speed index is low, its rock drill bit wearing index will be relative higher. For rock with same name, for example, the difference of mineral ingredient and quantity of quartz, grain size and form in granite is large, the difference of their drillability index is also large, here given is only the ordinary instruction of knowledge and, professional study is needed for how to make evaluation in actual work. Different drilling machine have different results to different rocks, when evaluate penetration capability, figures have commensurability only when same condition is selected.
Slow rotation and wearing of drill rod will occur in hard and toughness rocks and cause blocking or breaking of drill rod or damage of drill bit, drill rod is extremely liable to wear in abrasion-resistant rocks. Rock crevice is able to clamp the drill rod and drilling along the crevice direction and causing inclination of drill hole, the drill rod is bumping and vibration of drill truck occurs. Soft rock normally creates constraint in flushing drill holes. For this reason, for drilling workers, understanding of rock geological condition in the roadway to be excavated can avoid failure or provide prevention, reduce unexpected lose. Jumbo truck with large percussion force and torque and good abrasion-resistant drill rod are required for hard and extremely hard rocks.