(1) FK20-2BCDL hydraulic face drilling jumbo is designed for underground mining, tunneling, and construction applications. It is suitable for medium- to large tunnel with coverage area max. up to 8.7 meters x 6.3 meters. Drilling hole diameter ranges from 32mm to 76mm, hole depth ranges from 2.1 to 3.5 meters. The jumbo is equipped with a patent-winning FOR550 Hydraulic rock drill with 24KW impact power.
(2) The electric motor provides power for the operation. The hydraulic system controls the drilling process, and the the diesel engine provides the power for the moving and slope climbing of the jumbo. Safe and efficient hydraulic-driven system applies to the entire machine. Separate hydraulic pumps controls anti- jamming, feeding, and rotary of the drilling process. All the alarm indicators, such as the overheat indicators for water and oil temperature, guarantee the miners to know the real conditions of the jumbo all the time.
(3)The jumbo can be used not only for drilling blast holes, but also can drill drift rods. The rock drill guarantees accurate precision and maximum drilling speed. For the miners, the jumbo provides maximum safety protection, better working efficiency and lower expenses on the drilling rods.
Related Videos
Main Configuration and Technical Parameters
Chassis
Diesel engine: Deutz F5L912W
Power rating at 2300rpm: 52kW
Torque at 1550rpm: 258N.m
Fixed seat for tramming: Yes
Fuel oil tank volume: 60L
Articulated Steering: ± 41°
Travelling speed: 10 Km/h
Gradeability: 15°
Horn beacon and reverse: Yes"
Four-wheel drive: Yes
FOPS cabin: Yes
Hydrostatic power steering: Yes"
Hydrostatic transmission: Yes
Front axle: Dana112
Rear axle: Dana112+311
Clearance outside axles: 15°
Hydraulic jacks, front: 2 extendable
Hydraulic jacks, rear: 2 extendable
Service brakes: 2 separate circuits
Emergency & parking brakes: SHAR
Electric system: 24V
Batteries: 2 x 12V, 70Ah
Dimensions
Width: 1910mm
Height roof (up/down): 2200/2900mm
Length: 11200 mm
Weight: 11500Kg
Rock Drill
Model: FOR550
Shank adapter: R32 R38 T38
Impact power: 24KW
Impact rate: 60-75 HZ
Impact pressure: 17-21 Mpa
Feed impact force: ≤425 J
Hydraulic Pressure max: 130 bar
Rotation system: Separate rotation
Rotation speed: 0-300 rpm
Rotation torque, max.: 980 Nm
Water consumption: 50 L/min
Lub. Air consumption: 5 L/s
Hole diameter: 32mm-76mm
Length without shank: 600mm
Height over drill center: 88mm
Weight: 190 Kg
Sound Level: <110 dB(A)
Boom
Model: FKZB4
Parallel holding: Complete
Boom extension: 1250mm
Feed roll-over: ±180°
Max. Lifting angle: +65°/-30°
Max. Swinging angle: ±35°
Weight, boom only: 1750 kg
Feed
Model: FKT650
Total length: 5850 mm
Feed extension: 1250mm
Drill rod length: 3700 mm
Hole depth: 3500 mm
Feed force, max.: 15KN
Water System
Pump type: Booster Pump
Water pressure: 8-12 bar
Max. Capacity: 80L/min
Water pump power: 7.5kw
Air System
Air compressor: YES
Working pressure: 2-8 bar
Working flow: 10 L/s (6 bar)
Air pressure gauge: Yes
Hydraulic System
Hydraulic pump group: 1 set
Pumps unloaded at start: Yes
System pressure, max: 200 bar
Oil tank, max.: 165 L
Refueling filtration accuracy: 10 um
Low oil level indicator: Yes
Hydraulic System
Oil temperature gauge on oil tank: Yes
Manual oil filing pump: Yes
Oil filter indicator: Yes
Water cooled oil: Yes
Filtration: Yes
Mineral hydraulic oil: Yes
Electric System
Motor model: ABB YX3 250M-4
Power rating: 55 KW
Voltage: 220-1000 V
Frequency: 50-60 Hz
Start type: Triangle/Star/Direct start
Thermal overload protection: YES
Shock timer: YES
Digital voltage/current meter: YES
Phase sequence indicator: YES
Leakage indicator: YES
Battery charger: YES
Transformer capacity: 1.5 Kva
Cable coil (diameter): 660/1195 mm
Deliver, Shipping And Serving
Product Qualification
Latest News - Customer visit FOCOR
On October 12th, FOCOR sucessfully shipped 2 pcs of Face drilling rig with model of FK20-1BCDL to America.