Welcome Customer !

Membership

Kaifeng Henghe Flow Meter Co., Ltd.
Free Member ·1YRS
KaiFeng,HeNan
Manufacturer

Main Products: Flowmeter

Xwboo>Products

Kaifeng Henghe Flow Meter Co., Ltd.Free·1YRS

  • E-mail

    kfhheyb@163.com

  • Phone

  • Address

    East Section of South Energy Conservation Avenue, Luhuagang Turntable, Kaifeng City, Henan Province

Contact Now

Gas turbine flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Turbine flowmeter
Place of Origin
City, Province
Overview
The LWGQ gas turbine flowmeter is a high-precision, high-reliability gas precision metering that integrates temperature, pressure, flow sensors and intelligent flow totalizers, which is developed by itself by integrating theories of gas mechanics
Product Details

  Product Name: Gas Turbine Flowmeter

  I. Overview

  The LWGQ gas turbine flowmeter is a high-precision, high-reliability gas precision metering that integrates temperature, pressure, flow sensors and intelligent flow totalizers, which is developed by itself by integrating theories of gas mechanics, fluid mechanics, and electromagnetics. The instrument has low and high pressure metering performance, multiple signal output methods and low sensitivity to fluid disturbances. It is suitable for the metering of natural gas, coal gas, liquefied gas, light hydrocarbon gas and other gases.

  This product has been approved by the national explosion-proof product quality inspection department in accordance with GB3836.2000 "Electrical Equipment for Explosive Gas Atmosphere Part 1: General Requirements", GB3836.2-2000 "Electrical Equipment for Explosive Gas Atmosphere Part 2: Flameproof Type "d" 》And GB3836.4-2000 "Electrical Equipment for Explosive Gas Atmosphere Part 4: Intrinsically Safe Type "i"" standard inspection, and the explosion-proof marks are ExdⅡBT6 (flameproof type), ExiaⅡCT6 (intrinsically safe type). It is suitable for hazardous locations in zone 0 (intrinsically safe only) and zone 2 containing explosive gas mixtures of T1~T4 temperature groups of ⅡA, ⅡB, and ⅡC.

  2. Product features

  Special instrument for gas metering

  Special instrument for oil and gas recovery system

  High accuracy, generally up to ±1.5%R, ±1.0%R

  Good repeatability, short-term repeatability can reach 0.05%-0.2%. It is precisely because of its good repeatability that it is the preferred flow meter in trade settlement;

  The starting flow is low, and the low flow velocity, small measurement range is introduced.

  It can detect the temperature, pressure and flow of the gas to be measured, can automatically track and compensate the flow, and display the cumulative volume of gas under standard conditions (Pb=101.325KPa, Tb=293.15K); real-time query of temperature, pressure, time, Numerical values ​​such as dates.

  Built-in pressure and temperature sensors, high safety performance, compact structure, beautiful appearance

  The instrument has explosion-proof and protection functions, the explosion-proof mark is ExdⅡBT6, ExiaⅡCT4, and the protection grade is IP65

  The system works with low power consumption, a 3V10AH lithium battery can be used continuously for more than 3 years

  The meter coefficient and cumulative flow value will not be lost for ten years after power failure

  Three, working principle

  When the fluid flows into the flowmeter, it is rectified and accelerated by the special integrated rectifier at the air inlet. Because the turbine blades and the fluid flow are at a certain angle, the turbine generates a rotating torque. After overcoming the friction torque and the fluid resistance torque, the turbine starts Spin. Within a certain flow range, the angular velocity of the turbine rotation is proportional to the fluid volume flow. According to the principle of electromagnetic induction, the magnetic sensor is used to induce a pulse signal proportional to the fluid volume flow rate from the coaxial rotating signal wheel. The signal is amplified, filtered, and reshaped and enters the intelligent flow totalizer together with the temperature and pressure sensor signals. The micro-processing unit of the instrument performs arithmetic processing, and directly displays the volume flow and total volume of the gas on the LCD screen.

  4. Basic parameters and technical performance

  1. Basic parameters: (Table 1)

Instrument diameter (mm) and connection method20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 use flange connection (below 40, including 40 caliber can be used as thread)
Accuracy class±1.5%R, ±1%R, ±0.75%R (specially required)
Turndown ratio1:10:1:20:1:30
Instrument materialMeter body: 304 stainless steel; impeller: anti-corrosion ABS or high-quality aluminum gold; display: cast aluminum
Measured medium temperature (℃)-30℃~+80℃
Environmental conditionsTemperature: -20℃~+60℃, relative humidity 5%~90%, atmospheric pressure 86~106KPa
output signal

Sensor: pulse frequency signal, low level ≤0.8V, high level ≥8V

Transmitter: two-wire system ~ 20mADC current signal

Power supply

Sensor: +12VDC, +24VDC (optional)

Transmitter: +24VDC

On-site display type: the meter comes with 3V lithium battery

Signal transmission lineSTVPV3×0.3 (three-wire system), 2×0.3 (two-wire system)
Transmission distance≤1000m
Signal line interfaceInternal thread M20×1.5
Explosion-proof gradeExdIIBT6, ExiaⅡCT4
Protection levelIP65

 

  2. Technical performance:

Model specificationDisplay and output modePower supply
LWGQ-NThree-wire working condition pulse, low level ≤0.8V, high level ≥8V (no display on site)External power supply DC12V-24V
LWGQ-ATwo-wire system, working condition 4~20mA (no display on site)External power supply DC24V
LWGQ-BWith multi-point accuracy correction, the instantaneous flow and cumulative flow can be displayed simultaneously on the spot. The method is as follows:
Q XXXX four-digit instantaneous flow (m3/h)
XXXXXXXX eight-digit cumulative flow (m3)
Note: The cumulative flow starts counting from 00.000000, Automatically expand the display accuracy and record it to 999999.99. The accumulated flow value can be cleared, and the meter coefficient and accumulated flow value will not be lost for ten years after power failure.
Built-in 3V10AH lithium battery power supply
LWGQ-COn the basis of LWGQ-B (on-site display type), 4-20mA current output is added under working conditionsExternal power supply DC24V
LWGQ-DOn the basis of LWGQ-B (on-site display type), built-in temperature and pressure sensors are added to automatically compensate and correct the flow of different conditions. The temperature, pressure, battery power and other values ​​can be queried at the same time. It can output standard condition 4-20mA current, working condition pulse signal, standard condition pulse signal, IC card signal, RS485 communication protocol.3V10AH lithium battery or external power supply DC24V (signal output is required, external power supply is required)

 

Similar Product Recommend