Welcome Customer !

Membership

Kaifeng Henghe Flow Meter Co., Ltd.
Free Member ·1YRS
KaiFeng,HeNan
Manufacturer

Main Products: Flowmeter

Xwboo>Products

Kaifeng Henghe Flow Meter Co., Ltd.Free·1YRS

  • E-mail

    kfhheyb@163.com

  • Phone

  • Address

    East Section of South Energy Conservation Avenue, Luhuagang Turntable, Kaifeng City, Henan Province

Contact Now

Remote transmission type metal tube rotameter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Metal tube rotameter
Place of Origin
City, Province
Overview
Metal rotor flowmeter is a variable area flow measuring instrument commonly used in industrial automation process control.
Product Details

1. Product overview

  Metal rotor flowmeter is a variable area flow measuring instrument commonly used in industrial automation process control. It has the characteristics of small size, large detection range, and convenient use. The metal rotor flowmeter can be used to measure the flow of liquid, gas and steam, and is especially suitable for medium flow measurement with low flow rate and small flow.

2. Working principle

  The measured medium flows from bottom to top through the measuring tube at the upper and lower ends of the rotor to generate a differential pressure to form a rising force. When the rising force of the rotor is greater than the weight of the rotor immersed in the fluid, the rotor rises, and the area of ​​the annulus increases, and the fluid in the annulus The flow rate drops rapidly and the differential pressure between the upper and lower ends of the rotor decreases. When the lifting force acting on the float is balanced with the weight of the rotor immersed in the fluid, the rotor will stabilize at a certain position, and the height of the rotor position corresponds to the size of the measured medium fluid. The rotor has a built-in magnetic steel. When the rotor moves up and down with the medium, the magnetic field changes with the movement of the rotor.

  A. For the in-situ metal rotor flowmeter, the follow-up magnet in the in-situ indicator is coupled with the magnet in the rotor to rotate and drive the pointer at the same time to indicate the current flow rate through the dial.

  B. For the smart metal rotor flowmeter, the follower magnetic steel in the smart indicator is coupled with the magnetic steel in the rotor to rotate, and at the same time drive the sensing magnetic steel and pointer, the magnetic sensor converts the magnetic field change into an electrical signal , After A/D conversion, digital filtering, temperature compensation, microprocessor processing, D/A output, LCD liquid crystal display, to display the instantaneous flow and cumulative flow.

Three, flow meter

caliber

Water (L/h)

20℃ 101325Pa

Air (m3/h)

20℃ 101325Pa.abs

Maximum pressure loss (KPa)

 

Material RR0 RR1 RL

Material PTFE

Material RR0 RR1 RL

Material RR0 RR1 RL

Material PTFE

15

2.5-25

 

0.07-0.7

6.5

 

4-40

2.5-25

0.11-1.1

6.5

5.5

6-60

4-40

0.18-1.8

6.6

5.5

10-100

6-60

0.28-2.8

6.6

5.6

16-160

10-100

0.4-4.0

6.8

5.8

25-250

16-160

0.7-7.0

7.2

6.1

40-400

25-250

1.0-10

8.6

6.1

60-600

40-400

1.6-16

11.1

7.3

25

100-1000

60-600

3.0-30

7.0

5.9

160-1600

100-1000

4.5-45

8.0

6.0

250-2500

160-1600

7-70

10.8

6.8

400-4000

250-2500

11-110

15.8

9.2

50

600-6000

250-2500

18-180

8.0

6.5

1000-10000

400-4000

25-250

11.0

6.8

1600-16000

600-6000

40-400

16.2

9.4

2000-20000

1000-10000

60-600

16.2

14.5

80

2500-25000

1600-16000

60-600

8.2

6.9

4000-40000

2000-20000

100-1000

9.5

8.1

5000-50000

2500-25000

150-1500

9.5

8.1

100

6000-60000

4000-40000

180-1800

8.0

9.5

8000-80000

5000-50000

240-2400

10.0

9.2

10000-100000

8000-80000

300-3000

10.0

9.2

125

10000-100000

8000-80000

300-3000

10.0

8.5

25000-125000

10000-100000

 

12.2

10.1

150

25000-125000

10000-100000

 

11.0

9.2

30000-150000

30000-125000

 

13.2

12.1

20000-200000

 

 

 

 

 

Note: 1. When used to measure liquid, ensure that the working pressure is not less than twice the pressure loss; when used to measure gas, ensure that the working pressure is not less than five times the pressure loss to make the flowmeter work stably;

  2. The standard is flange connection, threaded connection and clamp connection can be customized according to requirements.

Similar Product Recommend