
(1) The processing shape is complex: the four-axis engraving machine adopts the four-axis linkage, which improves the complexity of the machined shape of the workpiece. It can not only complete the plane engraving of the three-axis fine carving machine, but also carry out the rotary three-dimensional engraving within the design range.
(2) Easy to use: users only need to input the geometric data information of the parts to be obtained, clamp the blank, start the machine, and then they can get the parts they want.
(3) Simple operation and control: servo motor drive device is used to directly read into the processing program and control the movement of each axis through the system for processing.
Spindle end structure: the spindle end is used to install fixtures and cutting tools. Fixtures and cutters are required to have high positioning accuracy, good positioning, convenient loading and unloading at the same time to make the spindle short length of suspension. CNC milling machine spindle end structure, the general use of short cone flange disc.
The main shaft adopts three support structure: the front support adopts tapered roller bearing, which is used to bear radial force and left axial force; The middle support adopts tapered roller bearing, used for bearing radial force and right axial force; The rear support is single row deep groove ball bearings, which only bear radial force. The rotary accuracy of the spindle is mainly guaranteed by the front support and the middle support. (The front and middle supports are the main, and the rear supports are the auxiliary).
The principal axes are a pair of orthogonal axes, which are easy to determine in most regular-shaped structures; Any plane with an axis of symmetry, its axis of symmetry and its orthogonal direction is the principal axis direction; A plane can have multiple spindles. In the main axis direction structure anti lateral stiffness is the smallest, deformation is the largest, so the specification only for the main axis direction calculation, but for some oblique layout of the component, the force may be along this oblique direction will make its internal force is the largest, so sometimes also need to use oblique direction calculation. Sometimes it is not easy to determine the main axis of the structure, so the x and Y directions closest to the main axis should be judged according to experience, or determined by calculation.
|