Welcome Customer !

Membership

Shenzhen Taian Electronics Co., Ltd.
Free Member ·1YRS
ShenZhen,GuangDong
Manufacturer

Main Products: Gas Alarm/Gas Detector/Gas Sensor|Buzzer (Piece)

Xwboo>Products

Shenzhen Taian Electronics Co., Ltd.Free·1YRS

  • E-mail

    sales@sztaian.com.cn / sales1@sztaian.com.cn

  • Phone

    86-755-86958980,86958981

  • Address

    Room 3101, East Building, Yihai Square, Chuangye Road, NanShan District, Shenzhen 518054 China.

Contact Now

TA-WW600 Wireless Dimmable Microwave Sensor Combine With LED Driver

Model
TA-WW600
Nature of the Manufacturer
Manufacturer
Product Category
Microwave Sensor
Place of Origin
City, Province
Overview
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.64 groups can be set RF transmission distance: up to 30m in open area.
Product Details

Master/slave signal transfer: When one light is triggered and switch on, it emits the signal to other lights in the same group, and triggers them on, too.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status, and waiting for the next room.
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
64 groups can be set
RF transmission distance: up to 30m in open area.


Technical Data:

Item No.

TA-WW600

Input voltage

220-240V/AC, 110-130V/AC

Rated Loading

LED 16W

IP Rating

IP20

Adjustment Type

Dip and Knob

Light Control

10-2000lux

Detection angle

360°

Detect Distance (radii.)

2-10m

Time delay

8sec to 10min

Stand-by Dim Setting Time

30sec, 1min, 5min, 10min, 30min, 1h, 2h, 24h

Stand-by Dim Setting Brightness

0%, 5%, 10%, 20%, 30%, 40%, 50%, 60%

Radio Linking Range

30m Radio

Detection angle

360°


Dimmable:

The dimmable lights are added a light down function between the light is 99% switched on and switch off.
It reduces the brightness of light when nobody there at a pre-set time. (The user can set up the brightness by themselves according to the actual usage).
If there is no motion in the stand-by time, the sensor turns off the light to save the energy. When somebody comes, the sensor will quickly turn on the light into full-brightness status. With this function the light can be extended the lifetime.


Similar Product Recommend