The thread area of Closed End Threaded Insert Rivet Nuts is enclosed, which prevents leakage past the threads from either side of your application
Product Details
Closed End Threaded Insert Rivet Nuts
Closed End Threaded Insert Rivet Nuts, sometimes referred to as a closed end rivet nut,closed-end threaded insert, thread sealing rivet nuts or closed end blind rivet nuts. Is a type of insert that is secured into material to provide a threaded hole.Rather than drilling a threaded hole directly into the material, the threaded insert provides a more durable fastening, especially when it is used in soft materials or in a work surface that is too thin to accommodate a conventional tap hole.
The closed-end rivet nut provides a strong fixing thread on thin plates and in applications where only one side of the plate can be contacted (such as box or tube cross-sections). Available in steel and stainless steel, they can be installed in plates as thin as 0.5 mm, and are not limited by the maximum hardness of self-tightening nuts, so they are suitable for installation in hard or non-ductile panels. Special installation tools are required-a wide range of tools, from low-cost hand tools for small batches to pneumatic automatic installation guns for high-volume applications. Rivet nuts have advantages over other fixed fasteners because they can be installed on-site or used for repair work to replace previously damaged fasteners. The advantage of installing from the side of the app means that you never need to access the back of the panel
To help prevent corrosion, our closed-end blind rivets have a completely closed end to prevent liquid, moisture, air and other contaminants from entering the riveted joint. Likewise, the rivets can be used to prevent leakage of such materials from components (for example, fluid from a storage tank).
Rivet nuts facilitate the installation of strong threaded inserts from one side of metal plates, pipes, extrusions and other materials that are too brittle to support the threaded hole. This provides threaded inserts for screws and bolts. The drive rod or bolt will cause the end of the rivet nut to anchor itself to the panel or part.