Quad-Leg Jack Insert Rivet Nut for light duty thin or soft/brittle material — will accommodate slightly over sized hole with large back side footprint.
Product Details
Quad-Leg Jack Insert Rivet Nut is a unique type of threaded fastener specially designed for light, thin or fragile materials. They accommodate a slightly oversized hole with a large footprint anchor on the back that resembles a wall. When to install, the main body of the jack nut is folded at the back (blind plate) to form four legs, which clamp the inside of the installation surface,. After tightening, the body will collapse to form legs that grip the interior of the mounting surface, leaving a permanent, reusable threaded insert. These special tools are required for proper installation of the fasteners.
Jack nuts
jacknuts
When you screw down the Quad-Leg Jack Insert Rivet Nut, the big seams in the body will cause them to collapse and open. The flange on the back disperses the force to resist passing through the thin metal. The minimum material thickness of nut is 0.4mm
Includes a friction wrench tool to hold the flange in place when installing with a screwdriver. For faster installation, use the rivet nut tool. The length is measured from below the flange.
Features include: fixed in the blind hole, no deformation or deformation of soft plastic or thin metal sheet, low price and easy to use, insensitive to hole size, firm fixation despite burr or uneven substrate, sealing with "plastisol" coating, suitable for a wide range of gripping, setting with manual or pneumatic tools, detachable, in thin metal It is fixed firmly on the plate and fixed quickly with pneumatic tools, without deformation to the thin metal plate.